HFCL ion4i-w Wi-Fi 5 2×2 Indoor Access Point User Guide
- June 3, 2024
- HFCL
Table of Contents
ion4i-w Wi-Fi 5 2×2
Indoor Access Point
User Guide
ANYWHERE
EVERYWHERE
Introduction
Thank you for choosing ion4i_w Wireless Access Point with 22.2 Multi-User MIMO and 802.11ac Wave 2 compliance.
Packaging Content
ion4i_w Specifications
| Peak Throughput(aggregate) | Up to 1.27 Gbps |
|---|---|
| Wi-Fi Standard Support | 802.11 a/b/g/n/ac/ac Wave 2 |
| Ethernet support/ Ports/Interface | 1 X 10/100/1000 BASE-T Ethernet |
| MU-MIMO | 2×2:2 |
| Mesh Support | Self-creating, Self-healing Mesh |
| Maximum number of SSID (per radio) | 4 |
| Maximum User Support | 128 on 5 GHz & 64 on 2.4 GHz |
| Power Supply | + 12V DC Power Adaptor (varies by region) |
| Power Consumption (Max) | 11.5 W approx |
| Max Transmit Power | 2.4 GHz— up to 25 dBm & 5 GHz— up to 25 dBm (will depend |
on country specific guidelines)
Antenna Type| Integrated antennas
Antenna Gain| 6 dBi for both 2.4 GHz and 5 GHz
Management| Standalone (via GUI) or through on-premise based solution or
cloud-based
Enclosure Dimensions| 180 x 180 x 50 mm (7.09 x 7.09 x 1.97 inch)
Weight| 0.37 kg
Operating Temperature| 0°C to 50°C
Certifications| FCC Class B, CE, Passpoint 3.0, WPA3, RoHS 3.0
Product Overview
Mounting of ion4i_w Access Point
-
Place the mounting bracket which came with the package on a wall or ceiling and mark holes with a marker where you will insert the screws. Drill holes in the marked points and insert the plastic wall anchors.
-
Use supplied screws and attach mounting bracket on the wall
Note Make sure that mounting bracket is tightly installed before mounting the Access Point on the wall or ceiling. -
Align the mounting slots of Access Point with the hooks of the mounting bracket, ensure that it is properly hinged
Unmounting of ion4i_w Access Point
- Slide the hooks of Access Point out from the mounting slots of mounting bracket.
WARNING: HFCL is not held liable for any damages incurred during the process.
Getting the ion4i_w Online
Step 1: Power up
The Access Point can be powered up using 12V DC adaptor as shown below.
— Power up using DC Power Adaptor —
Note: Plug and Adaptor will vary by country/ region
Step 2: Connect to the network
Section 1: Standalone AP
Follow the steps mentioned below and connect the Access Point to a network
-
Connect an ethernet cable to the computer.
-
Connect the other end of the ethernet cable to the LAN port on the ion4i_w Access Point
-
Configure the computer with a same domain static IP 192.168.1.X and a subnet mask of 255.255.255.0 (X is from 2 t0 255) -
Open the web browser and enter the Access Point static
IP address in the address bar. 192.168.1.1 -
A login screen will appear.
-
Enter the default login credential details: User- root, Password- hfcl!@ion
Section 2: Controller Managed AP
Follow the steps mentioned below and connect the Access Point to a network
- Power-up the AP through 12V DC adaptor
- Connect the AP to DHCP network and Internet
- Login to HFCL IO cloud controller (cNMS) cnms.ionetworks.in with credentials provided
- Refer our website io.hfcl.com for detailed information to configure AP through cNMS
Step 3: Check the LED status
| LED Color | Status |
|---|---|
| Ethernet LEDs | Green and yellow ethernet LEDs indicates ethernet link status |
| Status LED Blue (Solid) | Solid blue color notifies the user that either 2.4 |
GHz radio, 5 GHz radio or both radios are active
Status LED Blue (Blinking)| Blinking blue color notifies the user that data is
being transmitted on either 2.4 GHz radio, 5 GHz radio
or both radios
Safety Precautions
Observe the following safety precautions to avoid damage to the ion4i_w Access Point
Do not subject the device to high temperatures
Keep away from high voltage cables
Disconnect the device before cleaning it
Do not wipe the device with a damp cloth
Do not open the enclosure of the Access Point
Fasten the device tightly with the mount
Part Number: QSG-07-0003
Revision: A
Contact Us:
Email: iosupport@hfcl.com
Website:www.hfcl.com
www.io.hfcl.com
8, Commercial Complex, Masjid Moth,
Greater Kailash-II, New Delhi- 110048
HFCL Limited All Rights Reserved. 10 Networks and the 10 logo are registered trademarks of HFCL Limited. Specifications are subject to change without notice.
Documents / Resources
| HFCL
ion4i-w Wi-Fi 5 2x2 Indoor Access
Point
[pdf] User Guide
ion4i-w Wi-Fi 5 2x2 Indoor Access Point, ion4i-w, Wi-Fi 5 2x2 Indoor Access
Point, Indoor Access Point, Access Point, Point
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>