HFCL ad infinitum ion4xi User Guide
- June 3, 2024
- HFCL
Table of Contents
HFCL ad infinitum ion4xi
Introduction
Thank you for choosing ion4xi Wireless Access Point with 2×2:2
Multi-User MIMD and 802.11 ax compliance.
Packaging Content
ion4xi Specifications
| Peak Throughput(aggregate) | Up to 1.78 Gbps |
|---|---|
| Wi-Fi Standard Support | 802.11 a/b/g/n/ac/ac Wave |
2/ax
Ethernet support/
Ports/Interface
| 1 X 10/100/1000 BASE-T Ethernet
1 X 2500 Base X Optical Ethernet SFP
DC Power jack
MU-MIMD| 2×2:2
Mesh Support| Self-creating, Self-healing EasyMesh
Maximum number of SSID (per radio)| 16
Maximum User Support| 1024
Power Supply| IEEE 802.3at PoE/PoE+ or + 12V DC Power Adaptor
Power Consumption (Max)| 20 W (approx.)
Max Transmit Power| 2.4 GHz- up to 30 dBm & 5 GHz- up to 30 dBm (will
depend on country specific guidelines)
Antenna Type| Integrated antennas
Antenna Gain| 4 dBi for both 2.4 GHz and 5 GHz
Management
Enclosure Dimensions
| Standalone (via GUI) or through
on-premise based solution or cloud-based
180 x 180 x 50 mm (7.09 x 7.09 x 1.97 inch)
Weight| 0.60 kg
Operating Temperature| o·c to so·c
Certifications| FCC Class B, CE, Passpoint 2.0, EasyMesh, WPA3,
RoHS 3.0
Product Overview
Mounting of ion4xi Access Point
- Place the mounting bracket which came with the package on a wall or ceiling and mark holes with a marker where you will insert thescrews. Drill holes in the marked points and insert the plastic wall anchors.
- Use supplied screws and attach mounting bracket on the wall.
Note: Make sure that mounting bracket is tightly installed before mounting the Access Point on the wall or ceiling
- Align the mounting slots of Access Point with the hooks of the mounting bracket, ensure that it is properly hinged
Unmounting of ion4xi Access Point
- Slide the hooks of Access Point out from the mounting slots of mounting bracket
WARNING: HFCL is not held liable for any damages incurred during the process
Getting the ion4xi Online
Step 1: Power up
The Access Point can be powered up using PoE adaptor (48V) or DC adaptor (12V)
as shown below
Step 2: Connect to the network
Section 1: Standalone AP
Follow the steps mentioned below and connect the Access Point to a network :
-
Connect an ethernet cable to the computer.
-
Connect the other end of the ethernet cable to the LAN port on the ion4xi Access Point or use a PoE adaptor to do so.
-
Open the web browser and enter the Access Point static IP address in the address bar: 192.168.1.1
-
A login screen will appear.
-
Enter the default login credential details: User- root, Passwordhfcl!@ion
Section 2: Controller Managed AP
Follow the steps mentioned below and connect the Access Point to a network :
- Power-up the AP through PoE adapter or PoE switch
- Connect the AP to DHCP network and Internet
- Login to HFCL 10 cloud controller (cNMS) cnms.ionetworks.in with credentials provided
- Refer our website io.hfcl.com for detailed information to configure AP through cNMS
Step 3: Check the LED status
| LED Color | Status |
|---|
Power LED Green
| ****
Green color notifies the user that the device is powered ON
Status LED Green
| Green color notifies the user that the 2.4 GHz radio is active and blinks while data is being transmitted on 2.4 GHz radio
Status LED Blue
| Blue color notifies the user that the 5 GHz radio is active and blinks while data is being transmitted on 5 GHz radio
Status LED Cyan
| Cyan color notifies the user that both 2.4 GHz & 5 GHz radio are active and blinks while data is being transmitted on both radios
Safety Precautions
Observe the following safety precautions to avoid damage to the ion4xi Access Point
- Do not subject the device to high temperatures CD
- Keep away from high voltage cables CD
- Disconnect the device before cleaning it CD
- Do not wipe the device with a damp cloth CD
- Do not open the enclosure of the Access Point CD
- Fasten the device tightly with the mount
Contact Us:
Email: iosupport@hfcl.com Website:
www.hfcl.com
www.io.hfcl.com
8, Commercial Complex, Masjid Moth, Greater Kailash-II, New Delhi- 110048
HFCL Limited All Rights Reseived.10 Networks and the 10 logo are registered trademarks of HFCL Limited. Specifications are subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>