HFCL ion4xi Wi-Fi 6 2×2 Indoor Access Point User Guide

Quick Start Guide
ad infinitum
Sleek Smart Secure
ion4xi

ion4xi Wi-Fi 6 2×2 Indoor Access Point

ANYWHERE EVERYWHERE

Introduction

Thank you for choosing ion4xi Wireless Access Point with 2×2.2 Multi-User MIMO and 802.11ax compliance.

Packaging Content

ion4xi Specifications

Base X Optical Ethernet SFP DC Power jack
MU-MIMO| 202:2
Mesh Support| Self-creating, Self-healing EasyMesh
Maximum number of SSID (per radio)| 16
Maximum User Support| 1024
Power Supply| IEEE 802.3at PoE/PoE+ or + 12V DC Power Adaptor
Power Consumption (Max)| 20 W (approx.)
Max Transmit Power| 2.4 GHz— up to 30 dBm & 5 GHz— up to 30 dBm (will depend on country specific guidelines)
Antenna Type| Integrated antennas
Antenna Gain| 4 dBi for both 2.4 GHz and 5 GHz
Management| Standalone (via GUI) or through on-premise based solution or cloud-based
Enclosure Dimensions| 180 x 180 x 50 mm (7.09 x 7.09 x 1.97 inch)
Weight| 0.60 kg
Operating Temperature| 0°C to 50°C
Certifications| FCC Class B, CE, Passpoint 2.0, EasyMesh, WPA3, RoHS 3.0

Product Overview

Mounting of ion4xi Access Point

1. Place the mounting bracket which came with the package on a wall or ceiling and mark holes with a marker where you will insert the screws. Drill holes in the marked points and insert the plastic wall anchors.

2. Use supplied screws and attach mounting bracket on the wall.
   Note. Make sure that mounting bracket is tightly installed before mounting the Access Point on the wall or ceiling.

3. Align the mounting slots of Access Point with the hooks of the mounting bracket, ensure that it is properly hinged.

Unmounting of ion4xi Access Point

1. Slide the hooks of Access Point out from the mounting slots of mounting bracket. WARNING: HFCL is not held liable for any damages incurred during the process.

Getting the ion4xi Online

Step 1: Power up
The Access Point can be powered up using PoE adaptor (48V) or DC adaptor (12V) as shown below.

Power up using DC Power Adaptor

Note: Plug and Adaptor will vary by country/ region

Power up using PoE Adaptor

Step 2: Connect to the network
Section 1: Standalone AP
Follow the steps mentioned below and connect the Access Point to a network

1. Connect an ethernet cable to the computer.
2. Connect the other end of the ethernet cable to the LAN port on the ion4xi Access Point or use a PoE adaptor to do so.
3. Open the web browser and enter the Access Point static IP address in the address bar 192.168.1 1
4. A login screen will appear.
5. Enter the default login credential details·
   User- root, Password- hfcl!@ion

Section 2: Controller Managed AP
Follow the steps mentioned to connect Access Point to a network

1. Connect an Ethernet cable to the computer.
2. Power-up the AP through PoE adapter or PoE switch
3. Connect the AP to DHCP network and Internet
4. Login to HFCL 10 cloud controller (cNMS) iocloud.hfcl.com with credentials provided.
   4a. To get cNMS login credential, please send request email to iosupport@hfcl.com with below detailsCustomer Name| Customer email address| Customer address| Customer contact number| Distributor/ Retailer Name| No.of A Purchased| Country
   ---|---|---|---|---|---|---
   | | | | | |
5. Add AP group under configuration
6. Add APs in the AP group
7. Create SSID in the AP group
8. Refer our website io.hfcl.com for detailed information to configure AP through cNMS

Step 3: Check the LED status

active and blinks while data is being transmitted on 2.4 GHz radio
Status LED Blue| Blue color notifies the user that the 5 GHz radio is active and blinks while data is being transmitted on 5 GHz radio
Status LED Cyan| Cyan color notifies the user that both 2.4 GHz & 5 GHz radio are active and blinks while data is being transmitted on both radios

Safety Precautions

Observe the following safety precautions to avoid damage to the ion4xi Access Point:

Do not subject the device to high temperatures
Keep away from high voltage cables
Disconnect the device before cleaning it
Do not wipe the device with a damp cloth
Do not open the enclosure of the Access Point
Fasten the device tightly with the mount

Part Number QSG-01-0014
Revision: A

Contact Us:
Email: iosupport@hfcl.com
Website: www.hfcl.com
wwwio.hfcl.com
8, Commercial Complex, Masjid Moth,
Greater Kailash-II, New Delhi- 110048
HFCL Limited All Rights Reserved. 10 Networks and the 10 logo are registered trademarks of HFCL Limited.
Specifications are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>