Govee H6159 WiFi RGB LED Strip Light User Manual

June 17, 2024
Govee

User Manual
Model: H6159
Wi-Fi RGB LED Strip Lights

At a Glance

Strip Lights 1
Power Adapter 1
User Manual 1
Service Card 1

Specifications

Length 5m/16.4ft
Lighting Color RGB
Waterproof No
Control Method App & Control Box & Voice Control
Power Supply Adapter 12V

Installing Your Strip Lights

  1. Preparation Before Installing
    a. Unpack the box and check all items listed in the packing list.
    b. Power on the strip lights and check whether they light up.

  2. Installing Steps
    a. Wipe the surface to make sure it’s clean and dry.
    b. Peel off the protective film on the tape, stick the strip on and press over it firmly. c. Reinforce via clips around corners. d. Peel off the protective film on the control box and stick it on. e.Power on the strip lights and begin using.

Controlling with the Control Box

Govee H6159 WiFi RGB LED Strip Light - Control Box 1

Button Function
On/Off Turn the light on/off.
Color Changing Press to cycle through 9 colors.

Music Mode/
Brightness Adjusting| Press to enter music mode.
Press and hold to cycle through
the 6 brightness levels.

Downloading the Govee Home App

  • Download the Govee Home app from App Store (iOS devices) or Google Play (Android devices).
  • Notice: A smartphone running iOS 9.3 (or above) or Android 4.4 (or above) is needed.Govee H6159 WiFi RGB LED Strip Light - needed.

Connecting to a Wi-Fi Network

  • Turn on Bluetooth in your mobile phone;
  • Open Govee Home app and tap “+” icon in the top right corner;
  • Select “H6159” in the device list;
  • Select a 2.4GHz Wi-Fi to connect or skip the setup.

Controlling Your Strip Lights with Alexa/Google Assistant

  1. Wi-Fi Setting
    Make sure the strip is connected to Wi-Fi, if not, please follow the steps below to set up Wi-Fi.
    a. Open the app, select the strip light that has been added and tap setting icon in the top right corner.
    b.Tap “Wi-Fi Setting”, select an available Wi-Fi network and enter password.
    Notice: Only supports 2.4GHz and 802.11 b/g/n Wi-Fi networks.

  2. Works with Alexa/Google Assistant
    a. Open the app, select the strip light that has been added and tap setting icon in the top right corner.
    b.Tap “Using guidance” and follow on-screen instructions to complete setup.

Troubleshooting

  1. The adhesive tape is not strong enough.
    a. Make sure the installation surface is clean and dry.
    b. Firmly press over the strip after sticking.
    c. Reinforce the installation via more clips and tape.

  2. Cannot connect to Bluetooth.
    a. Do not skip Bluetooth connection in the app.
    b. Make sure Bluetooth in your mobile phone has been turned on.
    c. It may be caused by incompatibility between the phone system and the app.Please change to another mobile phone and connect again.
    d. Re-power on the strip and re-turn on Bluetooth in your phone and try again.
    e. Keep the distance between the strip and the phone less than 1 m/3.28ft while connecting.
    f. Keep obstructions between the strip and the phone as few as possible.

  3. The strip doesn’t match the same color/Some lamp beads don’t light up.
    Please contact Govee support team in time for return.

  4. Cannot connect to Wi-Fi.
    a. Do not skip the Wi-Fi connecting steps in the app.
    b.SGHz network is not supported. Please set the router to 2.4GHz and then reset it.
    c. Connect your phone to Wi-Fi and check whether the network works well.
    d.Make sure you have entered the correct Wi-Fi name and password.
    e. Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.
    f. Connect hotspot in your phone to the strip lights and check whether the router works with the strip lights.

  5. Cannot sync to the music beat.
    a. Please keep the control box close to the sound source.
    b. Clean out the sound picking hole on the control box.

  6. Cannot connect to Alexa.
    a. Pull out every connective part of the strip lights and firmly re-connect them.
    b. Re-connect your phone to Wi-Fi.
    c. Plug out the adapter port and re-plug it in.

  7. The strip lights don’t work.
    a. Pull out every connective part of the strip lights and firmly re-connect them.
    b. Tap On/Off button on the control box or app to check whether it is a strip quality issue.

Customer Service

| Warranty: 12-Month Limited Warranty
---|---
| support: Lifetime Technical support
| Email: support@govee.com
| Official Website: www.govee.com

@Govee
@Govee
@covee
@Goveeorcal

Compliance Information

EU Compliance Statement:
Shenzhen lntellirocks Tech Co. Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.govee.com/
EU contact address:  BellaC0cool GmbH (E-mail: info@bellacocool.de)
Pettenkoferstra~e 18, 10247 Berlin, Germany

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points.With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Non-replaceable light source.
Not intended for illumination. Only used for creating ambiance.

  1. Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
  2. Do not use the rope light when covered or recessed into a surface;
  3. Do not open or cut the rope light;

Govee is a trademark of Shenzhen lntellirocks Tech Co.Ltd.
Copyright ©2020 Shenzhen lntellirocks Tech Co.Ltd. All Rights Reserved.

| BLE| Wi-Fi
---|---|---
Frequency| 2.4GHz| 2.4GHz
Maximum Power| <10dBm| < 20dBm

836-6159-23502

https://www.govee.com/apps/qrcode

For FAQs and more information, please visit: www.govee.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals