HFCL ion4i_w Raven High Performance User Guide
- June 3, 2024
- HFCL
Table of Contents
ion4i_w Raven High Performance
User Guide
ion4i_w Raven High Performance
ANYWHERE EVERYWHERE
Introduction
Thank you for choosing ion4i_w Wireless Access Point with 2×2:2 Multi-User
MIMO and 802.11 ac Wave 2 compliance.
Packaging Content
ion4Lw Access Point (Qty:1)| DC Power Adaptor (Varies by Region) (Qty:1)|
Mounting Bracket (Qty:1)
Mounting screws Qty:4)| Quick Start Guide (Qty:1)| Plastic Wall Anchors
Qty:4)
ion4i_w Specifications
Peak Throughput(aggregate)| Up to 1.27 Gbps
Wi-Fi Standard Support| 802.11 a/b/g/n/ac/ac Wave 2
Ethernet support/ Ports/Interface| 1 X 10/100/1000 BASE-T Ethernet
MU-MI MO| 2×2:2
Mesh Support| Self-creating, Self-healing Mesh
Maximum number of SSID (per radio)| 4
Maximum User Support| 128 on 5 GHz & 64 on 2.4 GHz
Power Supply| IEEE 802.3af PoE or + 12V DC Power Adaptor (Varies by Region)
Power Consumption (Max)| 11.5 W approx
Max Transmit Power| 2.4 GHz— up to 25 dBm & 5 GHz— up to 25 dBm (will depend
on country specific guidelines)
Antenna Type| Integrated antennas
Antenna Gain| 6 dBi for both 2.4 GHz and 5 GHz
Management| Standalone (via GUI) or through on-premise based solution or
cloud-based
Enclosure Dimensions| 180 x 180 x 50 mm (7.09 x 7.09 x 1.97 inch)
Weight| 0.37 kg
Operating Temperature| 0°C to 50°C
Certifications| FCC Class B, CE, Passpoint 3.0, WPA3, RoHS 3.0
Product Overview
Mounting of ion4i_w Access Point
-
Place the mounting bracket which came with the package on a wall or ceiling and mark holes with a marker where you will insert the screws. Drill holes in the marked points and insert the plastic wall anchors.
-
Use supplied screws and attach mounting bracket on the wall.
Note: Make sure that mounting bracket is tightly installed before mounting the Access Point on the wall or ceiling.
-
Align the mounting slots of Access Point with the hooks of the mounting bracket, ensure that it is properly hinged.
Unmounting of ion4i_w Access Point
- Slide the hooks of Access Point out from the mounting slots of mounting bracket.
WARNING: HFCL is not held liable for any damages incurred during the
process.
Getting the ion4i_w Online
Step 1: Power up
The Access Point can be powered up using PoE adaptor (48V) or DC adaptor (12V)
as shown below:
Step
2: Connect to the network
Section 1: Standalone AP
Follow the steps mentioned below and connect the Access Point to a network :
-
Connect an ethernet cable to the computer.
-
Connect the other end of the ethernet cable to the LAN port on the ion4i_w Access Point or use a PoE adaptor to do so.
-
Configure the computer with a same domain static IP 192.168.1.X and a subnet mask of 255.255.255.0 (X is from 2 to 255)
-
Open the web browser and enter the Access Point static IP address in the address bar: 192.168.1.1
-
A login screen will appear.
-
Enter the default login credential details: User- root. Password- hfc8@ion
Section 2: Controller Managed AP
Follow the steps mentioned below and connect the Access Point to a network :
- Power-up the AP through PoE adapter or PoE switch
- Connect the AP to DI-ICP network and Internet
- Login to HFCL 10 cloud controller (cNMS) cnms.ionetworks.in with credentials provided
- Refer our website lo.hfcl.com for detailed information to configure AP through cNMS
Step 3: Check the LED status
| LED Color | Status |
|---|---|
| Ethernet LEDs | Green and yellow ethernet LEDs indicates ethernet link status |
| Status LED Blue (Solid) | Solid blue color notifies the user that either 2.4 |
GHz radio, 5 GHz radio or both radios are active
Status LED Blue (Blinking)| Blinking blue color notifies the user that data is
being transmitted on either 2.4 GHz radio, 5 GHz radio
or both radios
Safety Precautions
Observe the following safety precautions to avoid damage to the ion4i_w Access
Point:
Do not subject the device to high temperatures
Keep away from high voltage cables
Disconnect the device before cleaning it
Do not wipe the device with a damp cloth
Do not open the enclosure of the Access Point
Fasten the device tightly with the mount
Part Number: QSG-01-0001
Revision: A
Contact Us:
Email: iosuppon@hfcl.com
Website: www.hfcl.com
www.io.hfcl.com
8, Commercial Complex, Masjid Moth,
Greater Kailash-II, New Delhi- 110048
HFCL Limited All Rights Reserved. 10 Networks and the 10 logo are registered
trademarks of HFCL Limited.
Specifications are subject to change without notice.