CAMDEN DOOR CONTROLS CM-1200 Stainless Steel Key Switches Instruction Manual
- June 17, 2024
- CAMDEN DOOR CONTROLS
Table of Contents
CAMDEN DOOR CONTROLS CM-1200 Stainless Steel Key Switches
PACKAGE CONTENTS
| (1 ) | Stainless steel faceplate |
|---|---|
| (2) | Tamper proof screws and driver |
| (1) | Color coded 18 AWG soldered leads |
| (1) | Lock ring |
Note: Mortise Cylinder Sold Separately
GENERAL DESCRIPTION
Camden key switches are designed to work with most 1”, 1 1/8” or 1 1/4”
mortise cylinders, and with different types of cams.
One or two switches may be installed, either momentary and/or maintained
(alternating on/off).
SPECIFICATIONS
| Input Voltage | 12-24V AC/DC |
|---|---|
| Contact Rating | 6A @ 30VDC (Standard), 15A @ 30VDC (Optional) |
| Switch Life | 100,000 cycles |
| Temp Range | 32°F – 85°F (0°C to +85°C) |
| Standard Finish | Stainless steel |
| Dimensions | CM-1200: 2 3/4” W x 4 1/2” H x 1.5” D (70mm x 114mm x 38mm) |
CM-2200: 1 3/4” W x 4 1/2” H x 1.5” D (44mm x 114mm x 38mm)
INSTALLATION
-
Fit the aluminum bracket against the stud on the back of the face plate. Insert the mortise cylinder through the front of the face plate being sure to align the grooves on the sides of the cylinder with the corresponding “Retainers” on the aluminum bracket. See fig 1. Some cylinders may appear not to fit. If the grooves on the side of the cylinder are irregular and do not align with the retainers on the bracket, use a metal file to file down the retainers slightly.
Note –do not file the retainers off completely as they prevent the cylinder from spinning in the face plate. -
Thread the brass cylinder lock ring onto the back of the cylinder and tighten to secure the aluminum bracket in place.
-
The switch(es) provided may be mounted in either the left or the right hole on the aluminum bracket. Thread the octagonal nut (spacer ring) on to the bushing (stem) of the switch before placing the switch in the hole.
-
Insert the switch up through the bottom of the desired hole. Secure the switch in place by screwing the round threaded washer onto the top of the switch.
-
Turn the key in the cylinder and ensure the cam lines up with the top of the switch squarely in the center. Adjust the switch in the slotted hole until the cam lines up with in the center of the switch. It does not affect operation of the cam if the cylinder rests against the switch, so long as the switch is not fully depressed until activated by a turn of the key. If the cam does not depress the switch, or blocks the switch, as needed.
Extra spacers are provided and may be used as required. -
Once the electrical connectors are completed (see fig 2), if necessary, attach the unit to the switch box, wall, or receptacle box using the supplied tamperproof or stainless steel Phillips screws.
CM-1200 & CM-2200 SERIES KEY SWITCHES
INSTALLATION INSTRUCTIONS
WIRING
WIRING LAYOUT & COLOR CODING
SWITCH
TYPE
|
1
SPST
MOMENTARY
N.O. or N.C
|
2
SPST
MAINTAINED
N.O. or N.C.
|
3
SPDT
MOMENTARY
|
4
SPDT
MAINTAINED
|
5
DPDT
MOMENTARY
|
6
DPDT
MAINTAINED
---|---|---|---|---|---|---
COMMON
|
BLACK
|
BLACK
|
GREY
|
GREY
|
GREY (X2)
|
GREY (X2)
NORMALLY
OPEN
|
BLACK
|
BLACK
|
BLUE
|
ORANGE
|
LUE (X2)
|
ORANGE (X2)
NORMALLY
CLOSED
|
BLACK
|
BLACK
|
ORANGE
|
ORANGE (X2)
|
ORANGE (X2)
|
ORANGE (X2)
Momentary : When the switch is pressed the current pole will change to
the opposite state until released.
Maintained : When the switch is pressed it will provide the opposite pole
until the button is pressed again.
Momentary : When the switch is pressed it will provide a change of state
on the N.O. & N.C. poles until released
Maintained : When the switch is pressed it will provide a change of state
on the N.O. & N.C. poles until button pressed again
Momentary : When the switch is pressed it will provide a change of state
on both of the N.O. & N.C. poles until released.
Maintained : When the switch is pressed it will provide a change of state
on both of the N.O. & N.C. poles until pressed again.
CM-1200 & CM-2200 SERIES KEY SWITCHES INSTALLATION INSTRUCTIONS
OPTIONAL WIRING
Key Switches may be ordered with optional LED’s. These drawings show the various wiring configurations of the LED’s.
NOTE: These LEDs are designed for DC Voltage only.
**PARTS INFORMATION
**
NOTE:
- CM-1200 and CM-2200 Series with option to install one or two switches (SPST, SPDT or DPDT) either momentary and/or maintained. (Refer to switch options table)
ORDERING INFORMATION FOR REPLACEMENT PARTS
ITEM NUMBER
| PART NUMBER| DESCRIPTION
1| 60-40G011| ALUMINUM BRACKET
2| A. CM-1200 SERIES| STAINLESS STEEL (SINGLE GANG) FACE PLATE FOR FLUSH
MOUNT KEY SWITCHES
60-49B047
B. CM-2200 SERIES| STAINLESS STEEL (MULLION) FACE PLATE FOR FLUSH MOUNT
KEY SWITCHES
PARTS KIT
ITEM NUMBER| PART NUMBER| DESCRIPTION
| CM-1200 & CM-2200 SERIES| (A) 6-32 X 3/4 SNAKE EYE TAMPER PROOF
SCREWS (SNAKE EYE)
3| 60-34B048| (B) 6-32 X 3/4 PHILLIPS OVAL HEAD ZINC PLATED SCREWS
(C) CYLINDER LOCK RING
| | (D) KEY FOR TAMPER PROOF SCREWS (SNAKE EYE)
SWITCH OPTIONS
ITEM NUMBER| MODEL NUMBER| QTY| PART NUMBER|
DESCRIPTION
SINGLE GANG| MULLIO
4| CM-1200| CM-2200| 1| 60-68D046| SPST MOMENTARY CONTACT SWITCH, N/O 6A @125V
AC, 3A@ 30V DC
CM-1205| CM-2205| 1| 60-68D048| SPST MOMENTARY CONTACT SWITCH, N/C 6A @125V
AC, 3A@ 30V DC
CM-1210| CM-2210| 1| 60-68D049| SPST MAINTAINED CONTACT SWITCH, ON/OFF 6A
@125V AC, 3A@ 30V DC
CM-1220| CM-2220| 1| 60-68D052| SPDT MOMENTARY CONTACT SWITCH, 6A @125V AC,
3A@ 30V DC
CM-1230| CM-2230| 1| 60-68D054| SPDT MAINTAINED CONTACT SWITCH, 6A @125V AC,
3A@ 30V DC
CM-1250| CM-2250| 2| 60-68D052| SPDT MOMENTARY CONTACT SWITCH, 6A @125V AC,
3A@ 30V DC
CM-1260| CM-2260| 2| 60-68D054| SPDT MAINTAINED CONTACT SWITCH, 6A @125V AC,
3A@ 30V DC
CM-1270| CM-2270| 1| 60-68D052| SPDT MOMENTARY CONTACT SWITCH, 6A @125V AC,
3A@ 30V DC
1| 60-68D054| SPDT MAINTAINED CONTACT SWITCH, 6A @125V AC, 3A@ 30V DC
CM-1280| CM-2280| 1| 60-68D053| DPDT MOMENTARY CONTACT SWITCH, 6A @125V AC,
3A@ 30V DC
CM-1282| CM-2282| 2| 60-68D053| DPDT MOMENTARY CONTACT SWITCH, 6A @125V AC,
3A@ 30V DC
CM-1290| CM-2290| 1| 60-68D055| DPDT MAINTAINED CONTACT SWITCH, 6A @125V AC,
3A@ 30V DC
CM-1292| CM-2292| 2| 60-68D055| DPDT MAINTAINED CONTACT SWITCH, 6A @125V AC,
3A@ 30V DC
| SINGLE LED OPTIONS| DOUBLE LED OPTIONS
---|---|---
ITEM NUMBER| MODEL NUMBER| QTY| PART NUMBER|
DESCRIPTION| MODEL NUMBER| QTY| PART NUMBER|
DESCRIPTION
5| CM-XXXX-7012| 1| 60-73C008| RED 12V LED| CM-XXXX-70122| 2| 60-73C008| RED
12V LEDS
CM-XXXX-7024| 1| 60-73C010| RED 24V LED| CM-XXXX-70242| 2| 60-73C010| RED 24V
LEDS
CM-XXXX-7112| 1| 60-73C009| GREEN 12V LED| CM-XXXX-71122| 2| 60-73C009| GREEN
12V LEDS
CM-XXXX-7124| 1| 60-73C011| GREEN 24V LED| CM-XXXX-71242| 2| 60-73C011| GREEN
24V LEDS
CM-XXXX-7212| 1| 60-73C009| GREEN 12V LED| CM-XXXX-72122| 2| 60-73C009| GREEN
12V LEDS
1| 60-73C008| RED 12V LED| 2| 60-73C008| RED 12V LEDS
CM-XXXX-7224| 1| 60-73C011| GREEN 24V LED| CM-XXXX-72242| 2| 60-73C011| GREEN
24V LEDS
1| 60-73C010| RED 24V LED| 2| 60-73C010| RED 24V LEDS
CM-XXXX-7412| 1| 60-73C014| AMBER 12V LED| CM-XXXX-74122| 2| 60-73C014| AMBER
12V LEDS
CM-XXXX-7424| 1| 60-73C012| AMBER 24V LED| CM-XXXX-74242| 2| 60-73C012| AMBER
24V LEDS
CM-XXXX-7612| 1| 60-66B001-12| BI-COLOR 12V (3 WIRE) LED| CM-XXXX-76122| 2|
60-66B001-12| BI-COLOR 12V (3 WIRE) LED
CM-XXXX-7624| 1| 60-66B001-24| BI-COLOR 24V (3 WIRE) LED| CM-XXXX-76242| 2|
60-66B001-24| BI-COLOR 24V (3 WIRE) LED
OPTIONAL MORTISE CYLINDERS
ITEM NUMBER| PART NUMBER| DESCRIPTION
6| CM-1000/60KD| MORTISE CYLINDER 1 1/8’’, KEYED DIFFERENT (SOLD SEPARATELY)
CM-1000/60KA| MORTISE CYLINDER 1 1/8’’, KEYED ALIKE (SOLD SEPARATELY)
CM-307| MORTISE CYLINDER HOUSING FOR BEST™ STYLE IC CORE (SOLD SEPARATELY)
CM-308| BEST™ STYLE IC CORE, KEYED DIFFERENT (SOLD SEPARATELY)
COMPATIBLE MOUNTING BOX OPTIONS
ITEM NUMBER| PART NUMBER| DESCRIPTION
7| CM-1200 SERIES
CM-34AL| SINGLE GANG ALUMINUM BOX, SURFACE MOUNT 2 7/8’’W X 4 5/8’’H X 2’’D
(73MM X 117MM X 51MM)
CM-66| FLUSH BOX & DRESS PLATE, STANDARD DEPTH BOX WITH 7’’ X 7’’ DRESS PLATE
HEAVY GAUGE STAINLESS STEEL
CM-31| SLEEVE COVER FOR STANDARD 2 3/4″ X 4 1/4″ (69MM X 110MM) SURFACE
ELECTRICAL BOX. HEAVY GAUGE STAINLESS STEEL
CM-CPC1| VANDAL AND WEATHER RESISTANT CLEAR LIFT COVER
CM-34BL| SINGLE GANG BLACK ABS BOX, SURFACE MOUNT 2 7/8″ W X 4 5/8″H X 1 3/4″D
(73MM X 117MM X 44MM)
CM-2200 SERIES|
CM-23D| SURFACE BOX WITH EXTRA DEPTH, FLAME AND IMPACT RESISTANT BLACK POLYMER
(ABS) 1 3/4″ W X 4 1/2″H X 1 3/4″D (46MM X 117MM X 43MM)
CUSTOMER SERIVCES
Opening New Doors to Innovation, Quality and Support!
Call: 1.877.226.3369 / 905.366.3377
Visit: www.camdencontrols.com
File: CM-1200/2200_Manual_Eng_R1.indd
Revision: July 31, 2019
Part No: #40-82B227
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>