HFCL HSP-IO 8 port PoE+ Industrial Switch User Guide

HFCL HSP-IO 8 port PoE+ Industrial Switch

Specifications

• Capacity: Switching: 24 Gbps, Forwarding: 17.86 mpps
• Port Configuration: 8×10/100/1000 Base-T Gigabit Access Ports with PoE+ support
• Uplink Ports: 2×10/100/1000 Base-T, 2x1G SFP Gigabit Uplink Ports
• PoE Feature: 240W (PoE Budget), Smart PoE
• L3 Features: Static Route and Inter-VLAN Routing, Dual Stack and IPv6
• Security: L2, L3, L4 ACLs, 802.1X Authentication (RADIUS, TACACAS+)
• Storm Control: Broadcast, Multicast and Unknown Unicast
• Management: CLI, Telnet, SSHv2, SNMP v1/v2/v3
• Temperature: Operating: -40 to 75 degree C
• Dimensions: 193 mm (Width) x 51 mm (Height) x 138 mm (Depth)
• Weight: 1.25 Kg
• Power Input: 44V to 57V DC

Product Overview

• 1x Console Port Heat Sink Cover
• 8×10/100/1000 PoE+ Ports
• 2x1G RJ45 + 2x1G SFP Uplink Ports
• System LEDs
• Ground
• 2xDC Power Input
• DIN Rail Mounting

DIN Rail Installation

1. Move the slot at the top of the DIN rail bracket onto the upper edge of the DIN rail.
2. Apply downward pressure on the spring within the bracket located at the top rear edge of the switch until the bottom edge of the front faceplate of the switch can be pushed backward and positioned under the lower edge of the DIN rail.
3. Release the pressure on the top of the switch to allow the DIN rail bracket spring to securely fasten the bracket to both the top and bottom of the DIN rail.
4. Perform a visual inspection of the bracket to ensure that the DIN rail is now inserted into both the upper and lower ports of the DIN rail bracket.

Login Access
The console access to the Switch can be obtained via the console port using RJ45 to DB9 serial port adapter. An administrator can access the device using command line interface (CLI) with specific console port settings.

Check LED Status

properly System is booting UP Speed LEDs for
RJ-45 ports Speed LEDs for SFP ports

Frequently Asked Questions (FAQ)

• Q: How do I reset the switch to factory defaults?
  A: To reset the switch to factory defaults, locate the reset button on the switch and press and hold it for at least 10 seconds. The switch will reboot and restore to factory settings.

• Q: Can I stack multiple switches together?
  A: Yes, you can stack multiple switches together using appropriate stacking cables and following the stacking configuration guidelines provided in the user manual.

• Q: What is Zero Touch Provisioning?
  A: Zero Touch Provisioning allows for automatic provisioning and configuration of network devices without manual intervention, simplifying deployment and management tasks.

Quick Start Guide
MODEL: HSP-IO-8GE2S-I2PDH
8 Ports Industrial PoE Managed Switch

• Indigenously developed Secured Network OS
• High Speed Fiber & Copper based backhaul
• Zero Touch Provisioning & Automation Capabilities

Introduction

Thank you for choosing 8-port PoE+ Industrial Switch from HFCL Switching Platform (HSP). The Switch has all Gigabit ports with access ports PoE+ enabled. This is L2 Managed Industrial Switch with 2x1G SFP and 2x1G RJ-45 uplink ports enabling termination of both copper and optical cables simultaneously.

Packaging Content
8 Port Switch Qty: 1 number

This Switch can be mounted in a rack using din rail mounting.

HSP-IO-8GE2S-I2PDH Specifications

Capacity| Switching: 24 Gbps,

Forwarding: 17.86 mpps

---|---
Port Configuration| 8×10/100/1000 Base-T Gigabit Access Ports with PoE+ support.
Uplink Ports| 2×10/100/1000 Base-T

2x1G SFP Gigabit Uplink Ports

PoE Feature| 240W (PoE Budget), Smart PoE
L3 Features| Static Route and Inter-VLAN Routing, Dual Stack and IPv6
Security| L2, L3, L4 ACLs, 802.1X Authentication (RADIUS, TACACAS+)
Storm Control| Broadcast, Multicast and Unknown Unicast
Management| CLI, Telnet, SSHv2, SNMP v1/v2/v3
Temperature| Operating: -40 to 75 degree C.
Dimensions| 193 mm (Width) x 51 mm (height) x 138 mm (depth).
Weight| 1.25 Kg
Power Input| 44V to 57V DC

Product Overview

To install the switch on a DIN rail, perform the following procedure:

1. Move the slot at the top of the DIN rail bracket onto the upper edge of the DIN rail.
2. Apply downward pressure on the spring within the bracket located at the top rear edge of the switch until the bottom edge of the front faceplate of the switch can be pushed backward and positioned under the lower edge of the DIN rail.
3. Release the pressure on the top of the switch to allow the DIN rail bracket spring to securely fasten the bracket to both the top and bottom of the DIN rail.
4. Perform a visual inspection of the bracket to ensure that the DIN rail is now inserted into both the upper and lower ports of the DIN rail bracket.

Login access

The console access to the Switch can be obtained via the console port using RJ45 to DB9 serial port adapter. An administrator can access the device using command line interface (CLI) with the following console port setting as part of factory default configuration.

Check the LED status

Safety Precautions

Observe the following safety precautions to avoid damage to the Switch:

• Do not power the device during installation.
• Keep away from high voltage cables.
• Do not power off the unit in the middle of an upgrade process.
• Do not open the enclosure.

Part Number: QSG-04-0001 Revision: A

Contact Us:

iosupport@hfcl.com
hfcl.com | io.hfcl.com
8, Commercial Complex, Masjid Moth, Greater Kailash-II, New Delhi- 110048

HFCL Limited All Rights Reserved. HFCL and io by HFCL are trademarks or registered trademarks of HFCL Ltd. Specifications are subject to change without notice.

References

• HFCL | Leading Digital Network Solutions | Manufacturers of Optical Fiber Cables
• IO by HFCL: Transforming Telecom and Technology Solutions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>