MEMPHIS MBUDAIRV2 mbud air True Wireless Earbuds User Guide
- June 3, 2024
- MEMPHIS
Table of Contents
MEMPHIS MBUDAIRV2 mbud air True Wireless Earbuds User Guide
Overview
Power On/Off
- With MBuds seated in the case and lid open, MBuds will power ON.
- When the case is closed, MBuds will power OFF.
- MBuds can be manually powered ON/OFF by holding the M FB (Multi Function Button) for 3 seconds.
Initial Pairing To Bluetooth Device
With MBuds seated in the case and Rd open, go to the Bluetooth menu on your
device and choose MBUDAIRV2. To pair to a new device you must disconnect your
Bluetooth device from the MBuds and repeat the pairing process with your new
device.
Find Your Fit With Different Ear-Hooks
MBuds can be worn in two different ways. The ear loops provide a secure fit
when exercising or on the go. For a traditional earbud fit, remove the ear-
hooks and replace them with the included standard gaskets. Be sure to align
the notch on the ear-loops with the notch on the MBuds. If the notch is not
aligned properly, the MBuds will not fit in the charging case and will not be
able to charge. MBuds will also not comfortably fit in your ears if the notch
is not aligned properly.
Start Listening
Place MBuds in ears and adjust for a secure and comfortable fit. Change the ear-tips if necessary for improved comfort and sound quality. Different size ear tips will provide a different level of seal which will alter the sound quality of your MBuds. You can use a single MBud or pair both MBuds together for listening to music or talking on the phone.
Charging The Case
MBuds are charging when they are seated in the case with the lid CLOSED. To
charge the case, plug the included USB-C cable into a USB charging block. The
LED light on the front of the case will indicate the remaining charge level of
the case in 25% increments.
To Charge The Earbud
Red light means the earbuds are charging
When fully charged, the red light turns OFF
Place MBuds into case. Be certain the MBuds are seated properly in the case and making contact with the charging pins. A RED led light indicates the earbuds are charging. Close the lid and allow MBuds to charge. Once the MBuds are fully charged, the LED light on the case will turn OFF.
Specification
- Bluetooth version: BT5.0+EDR
- MBud playback time: Approximately 5.5 hours
- MBud charging time: 1.5 hours
- Charging case charging time: 1.5 hours
- MBud Battery: 3.7V/60mAh
- Charging case battery: 3.7V/800mAh
Multi Function Button Commands
| Operation | Left Earbud | Right Earbud | Scenario |
|---|---|---|---|
| Long Press 3 Sec | Power On/Power Off | Power On/Power Off | Any Scenario |
| Long Press 1 Sec | Reject Incoming Call | Reject Incoming Call | Incoming Call |
| Click Once | Answer/Hang Up | ||
| Play/Pause | Answer/Hang Up | ||
| Play/Pause | Incoming. Call |
Play Music
Double Click| Previous Track| Next Track| Play Music
Long Pres| Volume Down| Volume Up| Play Music
Triple Click| Activate Siri/Assistant| Activate Siri/Assistant| Any Scenario
Safety Precautions
Keep away the device away from extreme heat, humidity or corrosive environments.
Do not over-charing the earbuds or charging case. Once they are fully charged
you should remove them from the charger to prevent damage to battery service
life,
