pure gear Magnetic Selfie Stick Tripod Stand User Manual
- July 29, 2024
- PURe geaR
Table of Contents
pure gear Magnetic Selfie Stick Tripod Stand
Product Information
Specifications
- Product Name: Magnetic Selfie Stick Tripod Stand
- Brand: PureGear
- Model: YJW-11139PG
- Compatible Devices: Non-MagSafe and MagSafe phones
- Bluetooth Range: 2-3 ft (0.6-0.9m)
Product Usage Instructions
Connecting / Bluetooth Pairing
- Make sure the PureGear Magnetic Selfie Stick Tripod Stand remote is within 2-3 ft (0.6-0.9m) of the device you will be connecting to.
- Turn on your device’s Bluetooth. Most devices will automatically detect your PureGear Magnetic Selfie Stick Tripod Stand remote. Locate and select PG Selfie Stick. If your device does not automatically detect your remote, make sure Bluetooth is turned on, do a SEARCH for PG Selfie Stick and then click CONNECT.
Operating the PureGear Magnetic Selfie Stick Tripod Stand
- Lift up the bracket.
- For non-MagSafe phones, insert the mobile phone into the silicone holder.
- For MagSafe phones, remove the silicone phone holder and attach directly to the magnetic ring.
- To use the tripod, open the base and extend the telescoping neck to the desired position.
- Note: If the support does not close completely, please press the upper area with your fingers to close.
FAQ (Frequently Asked Questions)
-
Q: What should I do if my device does not automatically detect the remote during Bluetooth pairing?
A: If your device does not automatically detect the remote, make sure Bluetooth is turned on, do a SEARCH for PG Selfie Stick and then click CONNECT. -
Q: How should I handle the tripod when not in use?
A: To store the tripod, close the base and retract the telescoping neck. Ensure it is stored in a safe and dry place to avoid any damage.
Connecting / Bluetooth Pairing
- Make sure the PureGear Magnetic Selfie Stick Tripod Stand remote is within 2-3 ft (0.6-0.9m) of the device you will be connecting to.
- Turn on your device’s Bluetooth. Most devices will automatically detect your PureGear Magnetic Selfie Stick Tripod Stand remote. Locate and select “PG Selfie Stick”.
If your device does not automatically detect your remote, make sure Bluetooth is turned on, do a SEARCH for “PG Selfie Stick” and then click CONNECT.
Operating Instruction
Operating the PureGear Magnetic Selfie Stick Tripod Stand:
- Lift up the bracket.
- For non-MagSafe phones, insert mobile phone into silicone holder.
- For MagSafe phones, remove the silicone phone holder and attach directly to the magnetic ring.
- To use tripod, open the base and extend the telescoping neck to the desired position.
Note: If the support does not close completely, please press the upper area with your fingers to close.
FCC Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
FCC ID: YJW-11139PG
pure-gear.com
©2024 | F00230PG | 65028PG | 65029PG
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>