PURe geaR Magnetic Wireless Car Charger Instructions
- June 5, 2024
- PURe geaR
Table of Contents
Magnetic Wireless
Car Charger
Specs
Wireless Charger
- USB-CTM Input: 5V/3A, 9V/2A, 12V/1.5A
- Output: Up to 15W
Qualcomm® Quick ChargeTM 3.0 Car Charger
- Output: 3.66V/3A; 69V/2A; 912V/1.5A
Caution
DO NOT place any credit cards or other types of magnetic material near the
charging pad. Do not attempt to disassemble the wireless charging pad as it
may short circuit or damage the product. Keep at least 8″ (20cm) distance
between implantable medical devices such as pacemakers, cochlear implants,
etc. Keep this product in a dry and ventilated space. Do not place in direct
heat or use in high humidity environments. Do not use organic solvents to
clean surface.
Instructions
Attaching the VENT MOUNT:
-
Unscrew the large socket nut and push vent clip ball joint into the hole until it snaps into place.
-
Screw the socket nut back on until tight this locks the vent clip onto the wireless charging pad and holds the adjustable support base in place.
Attaching the SUCTION MOUNT:
-
Unscrew the large socket nut and push vent clip ball joint into the hole until it snaps into place.
-
Screw the socket nut back on until tight this locks the vent clip onto the wireless charging pad and holds the adjustable support base in place.
Using your Magnetic Car Mount Wireless Charger:
-
Connect the USB-A to USB-C cable to the USB-C port of the
Magnetic Car Mount Wireless Charger. -
Connect the USB-A connector into the included car charger and plug it in.
-
Place the back of your Apple iPhone® MagSafe® device against the Magnetic Car Mount Wireless Charger until it automatically aligns and snaps into place.
- Charging will begin automatically. *Works with MagSafe cases. Non-MagSafe cases must be removed before charging.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.
FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy; if not
installed and used in accordance with the instructions, maybe cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different form that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
One Year Limited Warranty
This wireless product is covered by a limited warranty to the original
purchaser only in that this product is free from defects in workmanship and
materials for ONE-YEAR from the date of purchase (damages through normal wear
and tear, alteration, misuse, neglect, accident, service by anyone other than
the authorized service center, or act of God not included). During the
warranty period and with proper proof of purchase, this wireless product will
be replaced. This limited warranty is in lieu of all other warranties, express
or implied, including, but not limited to, implied warranty of merchantability
or fitness for a particular use. For all warranty claims, the product must be
returned in accordance with PureGear’s return policy.
All trademarks and trade names are used for reference purposes only and are
the property of their respective owners.
pure-gear.com
© 2022 F00188PG
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>