PURe geaR 09803PG Fast Wireless Charger User Manual

June 5, 2024
PURe geaR

PURegeaR Logo 09803PG Fast Wireless Charger
User Manual

Specs

Model: 09803PG, 09925PG
Input: 5VDC/3A;9VDC/2.22A;12VDC/1.67A
Output: 5W/7.5W/10W/15W (Fast Charge)

  • Charging time may vary based on device
    NOTE: A 20W or higher USB-C ™ Power Adapter is recommended (sold separately) to enable fast wireless charging.
    Caution**
    DO NOT place any credit cards or other types of magnetic material near the charging pad. Do not attempt to disassemble the wireless charging pad as it may short circuit or damage the product. Keep at least an 8” (20cm) distance between implantable medical devices such as pacemakers, cochlear implants, etc. Keep this product in a dry and ventilated space. Do not place in direct heat or use in high humidity environments. Do not use organic solvents to clean the surface.

Using your Fast Magnetic Wireless Charger

  1. Plug the USB-C connector into the wall charger (not included).
  2. Plugin the wall charger (20W PD charger recommended).
  3. Place the PureGear Magnetic Wireless Charger onto the back of your MagSafe® device until it automatically aligns and snaps into place.

NOTE: This Magnetic Wireless Charger also supports non-magnetic, Qi- enabled devices.

One Year Limited Warranty

This wireless product is covered by a limited warranty to the original purchaser only in that this product is free from defects in workmanship and materials for ONE YEAR from the date of purchase (damages through normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than the authorized service center, or act of God not included). During the warranty period and with proper proof of purchase, this wireless product will be replaced. This limited warranty is in lieu of all other warranties, express or implied, including, but not limited to, implied warranty of merchantability or fitness for a particular use. For all warranty claims, the product must be returned in accordance with PureGear’s return policy.
All trademarks and trade names are used for reference purposes only and are the property of their respective owners.
FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy; if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance between 20cm from the radiator and your body.
IC Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference; and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the radiator & your body.

PURegeaR Logopure-gear.com
© 2021 F00182PG

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals