PURe geaR Duo Magnetic Wireless Charger Instructions
- June 5, 2024
- PURe geaR
Table of Contents
Duo Magnetic
Wireless Charger
Instructions
- Connect the USB-A to USB-C cable to the USB-C port on the base of the Duo Magnetic Wireless Charger.
- Insert the USB-A connector into the included wall charger and plug the charger into the wall.
- Place the back of your Apple iPhone® MagSafe® device against the Duo Magnetic Wireless Charger stand until it automatically aligns and snaps into place.
- Charging will begin automatically.
4. To charge a second device or AirPods†, simply place it on the base of the Duo Magnetic Wireless Charger. Charging will begin automatically.
PLEASE NOTE Works with MagSafe cases. Non-MagSafe cases must be removed
before charging.
†Airpods 2nd generation or newer.
Charging Indicator Light Status for Magnetic Charging Stand:
- SOLID BLUE: The device is charging.
- FLASHING BLUE: The device is not charging properly. Please reposition your device until you see the blue light turn solid blue.
- SOLID GREEN: The wireless charger is idle and ready to charge.
PLEASE NOTE: The indicator light will flash blue and green and then
remain green while in standby mode.
The bottom base charger does not have an indicator light status.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance between 20cm from the radiator of your body.
FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
FCC Interference Statement (cont.)
This equipment generates, uses, and can radiate radio frequency energy; if not
installed and used in accordance with the instructions, maybe cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
One Year Limited Warranty
This wireless product is covered by a limited warranty to the original
purchaser only in that this product is free from defects in workmanship and
materials for ONE YEAR from the date of purchase (damages through normal wear
and tear, alteration, misuse, neglect, accident, service by anyone other than
the authorized service center, or act of God not included). During the
warranty period and with proper proof of purchase, this wireless product will
be replaced. This limited warranty is in lieu of all other warranties, express
or implied, including, but not limited to, implied warranty of merchantability
or fitness for a particular use. For all warranty claims, the product must be
returned in accordance with PureGear’s return policy.
All trademarks and trade names are used for reference purposes only and are
the property of their respective owners.
Specs
Wireless Charger
- USB-C™ Input: 5V/3A; 9V/3A; 12V/2.5A
- Magnetic Wireless Stand Output: 15W
- Wireless Base Output: 5W
- Total Combined Output: Up to 20W
Fast Charge Wall Adapter
- Output: 5V/3A; 9V/3A; 12V/2.5A
*Charging time may vary based on the device
Caution
DO NOT place any credit cards or other types of magnetic material near the charging pad. Do not attempt to disassemble the wireless charging pad as it may short circuit or damage the product. Keep at least an 8” (20cm) distance between implantable medical devices such as pacemakers, cochlear implants, etc. Keep this product in a dry and ventilated space. Do not place in direct heat or use in high humidity environments. Do not use organic solvents to clean the surface.
pure-gear.com
© 2022 F00187PG