pure-gear 62242PG 10W Fast Wireless Charging Pad User Manual
- June 6, 2024
- PURe geaR
Table of Contents
10W Fast Wireless
Charging Pad
Using your Fast Wireless Charging Pad
-
Connect the Micro-USB charge/sync cable to the Micro-USB port on your Fast Wireless Charging Pad.
-
Plug the USB connector into the wall charger.
NOTE : Wall charger not included. -
Plugin the wall charger.
-
Place your Qi-enabled device on the Fast Wireless Charging Pad with the screen facing up. The LED is white when your device is charging.
Charging Indicator Light Status:
RED LIGHT: The device is not charging properly. Please reposition your
device until you see the white light come on.
WHITE LIGHT: The device is charging.
One Year Limited Warranty
This product is covered by a limited warranty to the original purchaser only
in that this product is free from defects in workmanship and materials for one
year from the date of
purchase (damages through normal wear and tear, alteration, misuse, neglect,
accident, service by anyone other than the authorized service center, or act
of God not included). During the warranty period and with proper proof of
purchase, this wireless product will be replaced. This limited warranty is in
lieu of all other warranties, express or implied, including, but not limited
to, implied warranty of merchantability or fitness for a particular use. For
all warranty claims, the product must be returned in accordance with
PureGear’s return policy. The ‘Qi’ symbol is a trademark of the Wireless Power
Consortium.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 8 inches between the radiator & your body.
FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
CAUTION : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the
FCC Interference Statement (cont.) instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specs
Wireless Charging Pad:
• Input: 5VDC/2A, 9VDC/1.67A
• Output: Up to 10W (Fast Charge)
- Charging time may vary based on the device
NOTE: Quick Charge 2.0/3.0 Wall Charger is required (not included) to enable fast wireless charging
CAUTION:**
DO NOT place any credit cards or other types of magnetic material near the charging pad. This product can ONLY be charged using the provided adapters and cables. Do not
attempt to disassemble the wireless charging pad as it may short circuit or damage the product. Keep this product in a dry and ventilated space. Do not place in direct heat or use in high humidity environments. Do not use organic solvents to clean the surface.
pure-gear.com
© 2020 F00131PG