TRIBIT BTH99 True Wireless Earbuds User Manual
- July 22, 2024
- Tribit
Table of Contents
TRIBIT BTH99 True Wireless Earbuds
Package Contents
Product Parts
How to Wear the Earbuds
On/ Off
The first time you use the earbuds, please tear off the insulation sticker.
Then place them in the charging case and close it.
Bluetooth Connection Guidelines
- Connect the earbuds with a Bluetooth device
- Open the top cover of the charging case, and the earbuds will automatically enter Bluetooth pairing mode.
- Open the Bluetooth function in the Bluetooth device, refresh the Bluetooth device search, and click the audio device named OpenGo· to connect. After successfully connecting, the earbuds indicator will go off.
- The two ways to connect with other devices are as follows:
1. Please disconnect the earbuds with the currently connected Bluetooth device, and the earbuds will automatically enter Bluetooth pairing mode.
2. Touch four times on any earbuds, then long press for 3 seconds, the earbud’s white indicator light flashes rapidly twice to indicate a successful reset.Button Functionality
Left
Right
Note: You can customize the touch buttons through the TRIBIT APP.
Charging Case Indicator Display
- When the cover is opened, the display inside the charging case indicates the current charge level of the charging case.
Charging Guidelines
- Charging of the earbuds: Put earbuds into the charging case. Then close the cover and charging will begin.
- Charging time of earbuds: about 90 minutes
- Charging of the charging case: Insert one end of the USB cable into a power supply that supports 5V output, and the other end into the charging port of the charging case.
- Charging time of the charging case: about 200 minutes
FCC
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, under Part 75 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy. If not installed and used by the instructions, it may cause harmful
interference to radio communication. However, there is no guarantee that
interference won’t occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, this can be
determined by turning the equipment off and on. Users are encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit that is different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
IC Caution
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Frequency band & Maximum transmission power
- Frequency band: 2402-2480MHz
- Maximum transmission power: -6 -+4dBm
Warning
- Do not dismantle or modify the earbuds for any reason, otherwise, any malfunction of the earbuds is not covered by the warranty.
- Do not deliberately contact the earbuds with liquids, which may damage the earbuds may be damaged and the warranty is invalid.
- Do not place the earbuds in an environment where the temperature is too high or too low.
- This product includes a built-in lithium battery. It is forbidden to disassemble, bump, squeeze, or throw the product into fire.
- Please keep the earbuds away from children to avoid accidental swallowing and other injuries.
The power delivered by the charger must be between min 1 Watts required by the radio equipment, and max 5.5 Watts to achieve the maximum charging speed.
- Manufacturer: Dongguan Lidu Electronic Technology Co., LTD
- Model: LD 523450
- Address: Floor 5, Building 2, Hesheng Industrial Park, 21 Dongfeng Nanshe Road, Humen Town, Dongguan City, Guangdong Province.
- Weight: 18g±0.5g
- Capacity: l000mAh 3.7V 3.7Wh
- Caution: Do not disassemble, impact, squeeze, or put into the fire. Do not place it in a hot environment. Do not use it after immersion. Please use the designated charger to charge.
- Applicable fire extinguishers: dry powder fire extinguishers.carbon dioxide fire extinguishers
- Chemical Components: Li-ion Polymer Battery
- Key Raw Materials: Lithium Cobalt Oxide, Graphite, Aluminiu(41), Copper (Cu)
- DATE: 202405
Hereby, [Thousandshores Deutschland GmbH] declares that the radio equipment type [True wireless Earbuds BTH99] complies with Directive 2074/53/EU.
- The full text of the EU declaration conformity is available at the following internet address: http://files.tribit.com/bth99-eu-doc.pdf.
- Learn more about the UK Declaration of Conformity, Please click the below link to download. http://files.tribit.com/bth99-uk-doc.pdf.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>