Tribit TS-BTS21 Portable Wireless Speaker User Manual
- June 5, 2024
- Tribit
Table of Contents
Tribit TS-BTS21 Portable Wireless Speaker
Safety Instructions
- NEVER drop it.
- DO NOT disassemble.
- Keep it away from extreme temperatures.
- DO NOT use the device outdoors during thunderstorms.
- DO NOT use any corrosive cleaner/oil for cleaning.
Specification
- Bluetooth version: 5.0
- Output power: 2 x 6W Frequency: 70Hz-20KHz
- Battery model: Lithium-ion battery
- Battery capacity: 3.N 2200mAh
- Battery charging time: 3.0H@SV 1 A
- Size: 178mm x 57mm x 54mm
- Waterproof grade: IPX7
What’s in the Box
Overview Buttons & Indicators
Connections
When it is being charged, the red light is always on; When it is fully charged, the red light is off.
**Buttons
**
When it is powered on, Xsound Surf will automatically connect to the last
paired device. If not found, it will automatically enter pairing mode.
Stereo Mode
- Make sure both speakers are on.
- Press * on one of the speakers to enter pairing state.
- Press * on the other speaker for Ss, then release the button to enter Stereo pairing when you hear the”Stereo mode’. When you hear”Left chanel ·on the left speaker and· Right chanel • on the right speaker, the” Stereo mode” is on.
Reset
If this speaker has some problems, you can try to press and hold “Volume+· and
“Volume-• button simultaneously for 5 seconds to reset, and then start
pairing again. ( Note: delete the old pairing in your device.)
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communication. However, there is no guarantee that interference won’t occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. Users are encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit that is different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>