Tribit QuietPlus 50 BTH73 Wireless Headphones User Manual
- June 5, 2024
- Tribit
Table of Contents
Tribit QuietPlus 50 BTH73 Wireless Headphones
Package Contents
Product Diagram
- MFB Button
- Active Noise Cancelling Slide Switch
- Volume+/Next Track
- Volume-/ Previous Track
- LED Indicator
- Type-c Charging Port
- 3.5mm Audio Input
- Microphone
Turn on/ off
- To power on the headphones, press and hold the MFB button for 2 seconds. The LED indicator will flash blue for 1 second
- To power off, press and hold the MFB button for 4 seconds. The LED indicator will fash red for 1 second and then go off
Bluetooth Connection
- Press and hold the MFB button for 5 seconds until the LED indicator flashes blue. A mament later, the headphones will automatically enter pairing made, with the LED flashing red and blue alternately.
- Activate the Bluetooth function on your Bluetooth-enabled device Select the Tribit QuietPlus S0 from the list of Bluetooth devices found by your device and connect.
Simultaneous Connection with Two Devices
- Follow the instructions in the “Pairing” section to pair the headphones with Device A.
- Once paired, disable the Bluetooth function on Device A.
- Follow the instructions in the Pairing” section to pair the headphones with Device B.
- Once paired with Device B, reactivate the Bluetooth function on Device A and select Tribit QuietPlus 50 in the list of paired devices.
- You can now make and receive calls from either of the two paired devices.
Noise Cancellation
The Noise Cancellation Function can reduce the unwanted noise to provide your
noise you canceling with a clearer, mode more based lifelike audio listening
effect. preference You can choose and environment. Once the function is turned
on, the ANC state will be on and the green indicator will be always on.
Operation of Buttons
Voice Prompt
Charging the Headphones
Connect the Type-C cable to the Type-C port on the headphone, and 5V power
outlet (power adapter is not included). The indicator light will glow red to
indicate charging. When the headphones are fully charged (within 3 hours, the
indicator light will change from red to blue.
Customer Service
The headphones have a full 18-month warranty against manufacturing defects
starting from the purchase date. For FAQs and more information, please email
to [email protected].
FCC Statement
Changes or modifications not expressly approved by the party responsible tor complance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV techniclan for help
This device complies with part 15 of the FCC rules Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.