Tribit BTH71 XFree Go Wireless Headphones User Manual

Tribit BTH71 XFree Go Wireless Headphones

Package Contents

Product Diagram

Turn on/ off

1. To power on the headphones, press and hold the MFB button for 2 seconds. The LED indicator will flash blue for 1 second.
2. To power off the headphones, press and hold the MFB button for 4 seconds. The LED indicator will flash red for 1 second and then will turn off.

Bluetooth Connection

1. Press and hold the MFB button for 5 seconds until the LED indicator flashes blue. A moment later, the indicator will flash red and blue alternately to indicate that the headphones automatically enter pairing mode.
2. Activate the Bluetooth function of your phone to search for Bluetooth devices, then click the Tribit XFree Go in the pairing list for connection.

Connect with Two Devices Simultaneously

1. Follow the instructions in the above Bluetooth Connection section to pair the headphones with Device A.
2. Once paired, disable the Bluetooth function on Device A.
3. Pair the headphones with Device Bin the same way with Device A.
4. Once paired with Device B, reactivate the Bluetooth function on Device A and select”Tribit XFree Go” in the pairing list.
5. Now you can make and receive calls from either of the two paired devices.

Operation of Buttons

Answer/

End the call

| ****

Press the MFB button once

Reject the call| Keep the MFB button pressed for seconds
Redial the  last

called number

| Press the”+” and”-” buttons simultaneously for 1 second
Activate Siri| Press the MFB button twice

Clear the pairing list

| Press the MFB button and”+” button simultaneously for 4 seconds in the power-on state to clear the pairing list, then the headphones will enter the pairing state automatically.

Voice Prompt

Charge the Headphones

Connect the USB end of the provided charging cable to a SV power outlet ( power adapter is not included}, and connect the Micro USB end into the headphones. The LED indicator will glow red during the charging process, then change into green after being fully charged ( within 3 hours).
Customer Service
The headphones have a full 18-month warranty against manufacturing defects starting from the purchase date. For FAQs and more information, please email to support@tribitaudio.com.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu­lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equip­ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1. this device may not cause harmful interfer­ence, and
2. this device must accept any interference received, including interference that may cause undesired operation.

References

• TCPDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>