PROLED CCU 50 SWITCHING POWER SUPPLY DALI Installation Guide
- July 20, 2024
- PROLED
Table of Contents
PROLED CCU 50 SWITCHING POWER SUPPLY DALI
Product Information
Thank you for choosing PROLED SWITCHING POWER SUPPLY CCU 50 DALI. Our PROLED SWITCHING POWER SUPPLY CCU 50 DALI allows to control of constant current luminaires with different kinds of signal input.
Usage Instructions
Please make sure that the correct current is chosen before the power supply is connected to the luminaire.
- ON/OFF: Short press (0.9 s)
- Dimming: With every new long press, dimming continues in the opposite direction
- Last Value: With switching ON and OFF, the last value is kept, even in case of power blackout.
- Up to 64 drivers can be connected to one switch. For synchronization, the switch must be pressed very long (>15 s). All luminaires in the group will dim down to 50%.
- The last DALI command can be manually overridden (ON/OFF or PUSH-DIM according to the above description). Manual override is only valid until the next DALI command is received.
- The driver has a built-in permanent memory. This allows, after a power failure, to reset the luminaire to the last brightness setting.
FAQ
- How many drivers can be synchronized with one switch?
- Up to 64 drivers can be synchronized with one switch.
- How does the manual override function work?
- The last DALI command can be manually overridden by following the provided instructions. The override is valid until the next DALI-command is received.
OVERVIEW
- Thank you for choosing PROLED SWITCHING POWER SUPPLY CCU 50 DALI. Our PROLED SWITCHING
- POWER SUPPLY CCU 50 DALI allows to control of constant current luminaires with different kinds of signal input
SPECIFICATIONS
- DALI-Control
- Dimming with a 1-10V Signal
- PUSH-DIM-Function trough a switch, which is connected between L- and Switch-connector (see wiring diagram)
- Constant current value can be chosen by DIP-switches
TECHNICAL DATA
- Power supply: 220-240 VAC, 50/60 Hz
- Current output: 700 mA, 750 mA, 800 mA, 850 mA, 900 mA,
- 950 mA, 1000 mA, 1050 mA, 1100 mA, 1150 mA,
- 1200 mA, 1250 mA, 1300 mA, 1350 mA, 1400 mA
- Voltage output: 12-58 V (700 mA – 850 mA), 12-56 V (900 mA),
- 12-53 V (950 mA), 12-50 V (1000 mA),
- 12-48 V (1050 mA), 12-45 V (1100 mA),
- 12-43 V (1150 mA), 12-42 V (1200 mA),
- 12-40 V (1250 mA), 12-38 V (1300 mA)
- 12-37 V (1350 mA), 12-36 V (1400 mA)
- Power output: 40,5 W (700 mA), 43,5 W (750 mA), 46,5W (800 mA)
- 49 W (850 mA), 50 W (900 mA – 1400 mA)
- Signal input: PUSH-DIM, 1-10V or DALI IEC 62386-101 / 102 / 207
- Ambient temperature: -10°~45 °C
- Size: 124(mm) x 80(mm) x 30(mm)
- Net weight: 240g
DIMENSIONS
CHOOSE LED CURRENT
TYPICAL WIRING DIAGRAM
- Please make sure that the correct current is chosen before the power supply is connected to the luminaire.
USAGE
PUSH-DIM
- ON/OFF: short press (<0,4 s)
- Continuously dimming: long press (>0,9 s)
- With every new long press dimming continues in the opposite direction
- With switching ON and OFF the last value is kept, even in case of power blackout.
SYNCHRONISATION AT PUSH-DIM
- Up to 64 drivers can be connected to one switch
- For synchronization, the switch must be pressed very long (>15 s). All luminaires in the group will dim down to 50%.
MANUAL OVERRIDE
- The last DALI command can be manually overridden (ON/OFF or PUSH-DIM according to the above description). Manual override is only valid until the next DALI command is received.
PERMANENT MEMORY
- The driver has a built-in permanent memory. This allows, after power failure, to reset the luminaire to the last brightness setting.
03.17 Technical amendments reserved
CONTACT
- MBN GmbH
- Balthasar-Schaller-Str. 3
- 86316 Friedberg
- Germany www.proled.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>