PROLED L710252xxR Downlight Pollux 145 Round Installation Guide
- July 20, 2024
- PROLED
Table of Contents
PROLED L710252xxR Downlight Pollux 145 Round
Specifications
- Product Name: PROLED DOWNLIGHT POLLUX 145 ROUND
- Model Number: L710252xxR
- Input Voltage: 220-240VAC
- IP Rating: IP44
- Manufacturer: MBN GmbH
- Address: Balthasar-Schaller-Str. 3, 86316 Friedberg, Germany
- Website: www.proled.com
Product Usage Instructions:
Warning
- For indoor use only.
- Ensure safe disposal of packaging.
- Do not use the luminaire if the cable is defective.
- Installation should be done by a qualified electrician.
- Avoid looking directly at the lighted lamp.
Safety Indices
It is crucial to have a qualified electrician complete the installation to
ensure compliance with safety directives. The manufacturer is not liable for
damage caused by improper use or installation. Do not cover lamps with heat-
insulating materials.
The product is suitable for indoor use only and has an IP44 protection class
rating.
Installation
- Switch off the electricity at the mains before starting
- installation or changing the lamp. Remove the appropriate circuit fuse to prevent accidental power supply activation.
- Connect to a constant current driver 700 mA on the secondary side.
- Connect the primary side of the driver to the power supply (230V).
- Ensure all connections are secure with no loose strands.
- Adhere to fire regulations during installation.
- If unsure, consult a qualified electrician.
Please follow the installation sequence
- First, install the LED driver (not included).
- Then, install the LED driver (not included) with an input of 220-240VAC and IP44 protection.
FAQ
-
Q: Can this product be used outdoors?
A: No, this product is designed for indoor use only. -
Q: What should I do if the cable is damaged?
A: Do not use the luminaire if the cable is defective. Contact a qualified electrician for repair or replacement.
installation manual
PROLED DOWNLIGHT POLLUX 145 ROUND L710252xxR
Characteristics:
- SAMSUNG LED Warm White or Neutral White
- Power consumption 19 W
- Aluminium housing round
- Ring colour White
- Beam angle 80° (Frost) or 65° (Reflector)
- Driver 700 mA constant current (driver not included)
- Dimmable with special 700 mA constant current dimmer or 700 mA constant current driver
- Operating temperature range -10° C till +45° C
- CE compliant with applicable European directives
Warning
- For indoor use only
- Please ensure that the packaging is disposed of in a safe environment
- If cable is defected, do not use the luminaire
- We do recommend that a qualified electrician should be used to install the products
- Do not look at the lighted lamp directly
Safety indices:
Be sure to have a qualified electrician complete installation. The customer is
not entitled to claim for any lights installed without observing European
safety directives. The manufacturer is then discharged from liability when
damage is caused by improper use or installation. If any luminaire is
subsequently modified, the person responsible for the modification shall be
considered as manufacturer. Do not cover lamps with heat-insulating materials.
For indoor use only. Protection class IP44.
Installation
Please follow the sequence of installation step by step. Non-observance can lead to damage of LED.
- Switch off the electricity at the mains before commencing installation or lamp change and (if a fuse box is installed) remove the appropriate circuit fuse to avoid accidental switching on of the mains supply.
- Connect to a constant current driver 700 mA (secondary side)
- Connect primary side of driver to power supply (230V)
- Make sure all connections are tight with no loose strands
- Ensure fire regulations are not breached when fitting your lights
- If you are in any doubt regarding these instructions, consult a qualified electrician
Please follow the sequence, if not destroying of LED:
Installation
07.15 Technical amendments reserved
MBN GmbH ● Balthasar-Schaller-Str. 3 ● 86316 Friedberg ● Germany
www.proled.com