PROLED L710252xxS Downlight Pollux Instruction Manual
- July 21, 2024
- PROLED
Table of Contents
PROLED L710252xxS Downlight Pollux
Specifications
- Product Name: PROLED DOWNLIGHT POLLUX 145 SQUARE
- Model Number: L710252xxS
- Input Voltage: 220-240VAC
- IP Rating: IP44
- Manufacturer: MBN GmbH
- Address: Balthasar-Schaller-Str. 3, 86316 Friedberg, Germany
- Website: www.proled.com
Product Usage Instructions
Characteristics
- SAMSUNG LED Warm White or Neutral White
- Power consumption 19 W
- Aluminium housing square
- Ring colour White
- Beam angle 90° (Frost) or 80° (Reflector)
- Driver 700 mA constant current (driver not included)
- Dimmable with special 700 mA constant current dimmer or 700 mA constant current driver
- Operating temperature range -10° C till +45° C
- CE compliant with applicable European directives
Warnings
- For indoor use only.
- Properly dispose of packaging in a safe environment.
- Do not use the luminaire if the cable is defective.
- Installation should be done by a qualified electrician.
- Avoid looking directly at the lighted lamp.
Safety Instructions
It is crucial to have a qualified electrician complete the installation to ensure compliance with safety directives. Failure to observe safety guidelines may result in damage or voiding of the warranty. Do not cover lamps with heat- insulating materials. The product is suitable for indoor use only and has an IP44 protection class rating.
Installation Steps
- Switch off the electricity at the mains and remove the appropriate circuit fuse.
- Connect the luminaire to a constant current driver of 700mA on the secondary side.
- Connect the primary side of the driver to the power supply (230V).
- Ensure all connections are securely tightened with no loose strands.
- Adhere to fire regulations while fitting the lights.
- If you are unsure about the instructions, seek assistance from a qualified electrician.
Safety indices
Be sure to have a qualified electrician complete the installation. The customer is not entitled to claim for any lights installed without observing European safety directives. The manufacturer is then discharged from liability when damage is caused by improper use or installation. If any luminaire is subsequently modified, the person responsible for the modification shall be considered as manufacturer. Do not cover lamps with heat-insulating materials. For indoor use only. Protection class IP44.
Sequence of Installation
- First, install the LED driver (driver not included).
- Second, install the LED driver (driver not included).
Please follow the sequence, if not destroying of LED
DIMENSIONS
MBN GmbH
Balthasar-Schaller-Str. 3
86316 Friedberg
Germany
www.proled.com
FAQ
Q: Can I cover the lamp with heat-insulating materials?
A: No, it is not recommended to cover the lamp with heat-insulating materials as it may lead to overheating and reduce the lifespan of the product.
Q: What should I do if the cable is damaged?
A: Do not use the luminaire if the cable is damaged. Contact a qualified electrician to inspect and replace the cable before further use.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>