MEIKEE B04-23RSP-M-C Solar Spot Lights Outdoor Garden Color Instructions

MEIKEE B04-23RSP-M-C Solar Spot Lights Outdoor Garden Color

INTRODUCTION

• Thank you for purchasing MEIKEE products. To ensure a better shopping experience, please follow the instructions for use step by step.
• If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first time and resolve any problems about the products.
  E-mail: meikee@meikeelighting.com

Attention

1. The luminaire should be positioned at suggested installation height, please do not prolonged stare into the luminaire for more than 3 seconds within 2 meters.
2. The light source is not replaceable, when it reaches the end of its life, the whole luminaire needs to be replaced.
3. Because the solar panel is charged during the day, it will not turn on during the day. If you want to test the light during the day, please cover the solar panel or go to a dark room to test. (Do not shine the light on the solar panel in a dark environment, otherwise the light will flicker with high frequency)
4. The working time of the lamp is related to the charging time. The charging effect on a sunny day will be better than that on a rainy day. In the case of continuous rainy days, the light may not be turned on because it is not charged. Please charge 8H when the sunlight is sufficient, the lamp will turn on again.
5. Please install the solar panel in a place with sufficient sunlight. Note that places like tree shade or glass will affect the charging effect.
6. When you receive the product for the first time, please fully charge it before using it (at least 8 hours or more) to ensure the duration of the light.
7. Please clean the solar panel regularly to ensure the charging effect.
8. Do not disassemble and modify the product by yourself to avoid product damage.
9. Please stay away from fire sources. The waterproof rating of this product is IP66. Do not use it in water.

Parameters Table

Model| Solar Panel| Working Voltage| Light color| Lighting Angle| Projection Distance| High brightness| Middle brightness| Low brightness| Waterproof Rating| Total Cable Length| Lamp Body Material| ****

Ta

---|---|---|---|---|---|---|---|---|---|---|---|---
SL- SP02| 6V/2W| 3V/DC| 2700K/4000K/6500K| 25°| 5M| BH| 12H| 20H| IP66| BM| PC/ABS| -25C~40C
SL-SP03| 6V/3W| 3V/DC| 2700K/4000K/6500K| 25°| SM| BH| 12H| 20H| IP66| 11M| PC/ABS| -25C ~40C
SL-SP04| 6V/4W| 3V/DC| 2700K/4000K/6S00K| 25°| SM| BH| 12H| 20H| IP66| 14M| PC/ABS| -25C~40C
SL-SP06| 6V/6W| 3V/DC| 2700K/4000K/6S00K| 25°| SM| BH| 12H| 20H| IP66| 1BM| PC/ABS| -26C~4o·c
Note: When fully charged, the lighting time is 20 hours in low light, 12 hours in medium light and 8 hours in high light.

Product models/Size/Accessories

Solar panel installation

Note: The solar panel needs to be installed in a place where there is sufficient sunlight. Note that places like tree shade or glass will affect the charging effect.

Spotlight installation

How to Work

Wiring and mounting bracket

Control box and Light and solar panel extension cord connections: Connect the male and female ends of the extension cord and tighten the waterproof cap.

Control box function introduction

1. Input: charging input line
2. Charging indicator light (red light) — The light stays on during charging (the indicator light will change brightness with the charging voltage)
3. Brightness indicator light: low light level – green light, medium light level – yellow light, high light level – red light
4. Working indicator light (green light) — the indicator light is always on during work (this means that the battery box can work normally)
5. Switch button – after turning on the switch, the working indicator light is always on (green light)
6. Brightness adjustment button —
7. light – high light, cycle switching
8. Click this button, low light – medium
9. Battery Indicator Light:
10. 30% power — 1 light on
11. 70% power — 2 lights on
12. 100% power — 3 lights on
13. Less than 30% power – no indicator lights
14. Output: output lead

Remote Control—-Function Introduction

• ON/OFF: long press 3S to switch on and off

• Forced lighting: During the day/night, press this key–the light will be on for 2H (highlight); The light flashes twice, which means that it has entered the timing work. After the light is off, it will return to the timing 2H working mode of the light control mode the next day.

• 100% strong light: press this button, the lighting brightness is 100% output

• 70% medium light: press this button, the lighting brightness is 70% output

• 50% weak light: press this button, the lighting brightness is 50% output

• Gradient: In lighting mode, press this button, the light will change to 2700K-6500k-cyclic gradient .adjust the speed of light gradient

• Strobe: In any single-color lighting mode, press this button, the light will change to the current color strobe. EG) adjust the strobe speed

• Color temperature button: In the lighting mode, press the corresponding color temperature button, 2700K. 4000K. 6500K to switch the lighting color temperature

•  In lighting mode, press this button to adjust the color temperature from low to high (color temperature from 2700K-6500K), stepless

•  In lighting mode, press this button to adjust the color temperature from high to low (color temperature from 6500K-2700K), stepless

• 2H timing button: Press this button, the light in the working mode will flash twice, which means entering the timing working mode, and the light will be off automatically after 2H. Turning on the light again after charging during the day is still a 2H timing working mode.

• 4H timing button: Press this button, the light in the working mode will flash twice, which means entering the timing working mode, and the light will be off automatically after 4H. Turning on the light again after charging during the day is still a 4H timing working mode.

• 6H timing button: Press this button, the light in the working mode will flash twice, which means entering the timing working mode, and the light will be off automatically after 6H. Turning on the light again after charging during the day is still a 6H timing working mode.

FAQ

• The lamp doesn’t work.

1. Make sure the lamp is switch on.
2. The battery is out of power and charge the battery by solar panel in direct sunlight.

• Lighting time is short.

1. The working time depends on the power which stores in the rechargeable battery. (The battery can only be fully charged in a sunny environment)
2. The more power it charges during the day,the longer time it works during the night.

• Charging time
  Charging for over 8 hours is recommended. The solar products’ charging time is affected by weather condition and installation location.

• Working hours
  When the battery is fully charged, light control mode: the lighting time is 20 hours in low light, 12 hours in medium light and 8 hours in high light.

Warning

1. There is a battery inside, high temperature and violent impact are prohibited. Keep away from fire.
2. Do not stare at the LED light-emitting surface closely for a long time to prevent the hurt to the eyes.
3. Under no circumstances should the luminaire be covered by a thermal pad or similar material.

ABOUT COMPANY

• Company name: Shenzhen Oumeike Lighting Technology Co., Ltd.
• Address: No. 19-20, Anye Road, Yuanshan Street, Longgang District, Shenzhen, Guangdong, China (+86 0755-28608199)
• C&E Connection E-Commerce (DE) GmbH
  • Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
  • E-mail: info@ce-connection.de
  • Tel: +49 (069) 27246648
• CET PRODUCT SERVICE LTD.
  • Beacon House Stokenchurch Business Park, Ibstone Rd,
  • Stokenchurch High Wycombe HP14 3FE UK
  • Tel: +447419325266
  • E-mail: info@cetproduct.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>