MEIKEE B04-21CPD-M-E 60 LED Solar Spot Lights Outdoor Garden Stake User Manual

User Manual for Solar Landscape Spotlights

B04-21CPD-M E

B04-21CPD-M-E 60 LED Solar Spot Lights Outdoor Garden Stake

Thank you for purchasing MEIKEE products. To ensure a better shopping experience, please follow the instructions for use step by step.
If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first time and resolve any problems about the products.
E-mail: meikee@meikeelighting.com

Attention

1. The luminaire should be positioned at suggested installation height, please do not prolonged stare into the luminaire for more than 3 seconds within 2 meters.
2. The light source is not replaceable, when it reaches the end of its life, the whole luminaire needs to be replaced.
3. Because the solar panel is charged during the day, it will not turn on during the day. If you want to test the light during the day, please cover the solar panel or go to a dark room to test. (Do not shine the light on the solar panel in a dark environment, otherwise the light will flicker with high frequency)
4. The working time of the lamp is related to the charging time. The charging effect in a sunny day will be better than that in a rainy day. In the case of continuous rainy days, the light may not be turned on because it is not charged. Please charge 6-8H when the sunlight is sufficient, the lamp will turn on again.
5. Please install the solar panel in a place with sufficient sunlight. Note that places like tree shade or glass will affect the charging effect.
6. When you receive the product for the first time, please fully charge it before using it (at least 8 hours or more) to ensure the duration of the light.
7. Please clean the solar panel regularly to ensure the charging effect.
8. Do not disassemble and modify the product by yourself to avoid product damage.
9. Please stay away from fire sources. The waterproof rating of this product is IP66. Do not use it in water.

Product Parameters

6000K-4000K-2700K
Working Mode| High Brightness/Low Brightness| High Brightness/Low Brightness| PIR1Light Control| PIR/Light Control
Working Voltage| DC/3V| DC/3V| DC/3V| DC/3V
Working Time(Full Charge)| About 6H(High Brightness)
~12H(Low Brightness)| About 6H(High Brightness)
~12H(Low Brightness)| 30S/each time, about 250Times
(PIR)~12H(Light Control)| 30S/each time, about 250Times
(PIR)~12H(Light Control)
Battery Life| About 500 charge-discharge cycles| About 500 charge-discharge cycles| About 500 charge-discharge cycles| About 500 charge-discharge cycles
I P Rate| I P66| I P66| I P66| I P66
Working Temperature| -25°C ~ 40°C| -25°C ~ 40°C| -25°C ~ 40°C| -25°C ~ 40°C
Body Material| PC,ABS| PC,ABS| PC,ABS| PC,ABS
Note: When the charge and discharge reaches 500 rounds, the battery capacity decays to 60%-75% of the original capacity.

How It Works

Product Size and Switch Details

Light control model

PIR model

Light control model:

1. Working indicator light:
   • Left light 1 — power indicator: Green light on indicates that the power supply is normal, and off light indicates that the battery is not supplying power.
   • Left lights 2— high/low light mode indicator: green light on means high light mode, off light means low light mode.
   (Note: The sensor light model does not have this function)
   • Left lights 3 — solar panel indicator: red light on means that the solar panel is charging normally, the light off means that the solar panel is not charging.

2. Battery indicator light:
   Right light 1: green light on, about 100% power
   Right light 2: green light on, about 70% power
   Right light 3: green light on, about 30% power
   Product Switches and Settings

   ---

|

---|---
OFF/2 Brightness Modes: Low-High-OFF Cycle| 3 Color Temperature Modes: 2700K, 4000K,6000K

PIR model:

3. Working mode indicator:
   • Left light 1: Light control mode is turned on when the machine is turned on, and the indicator “1” lights up at the same time.
   In this mode, the lights automatically turn on at night without sensing motion.
   • Left light 2: After the light control mode-shutdown cycle, pressing the power button will enter sense control mode. At this time, the indicators “1” and “2” are lit at the same time. In this mode, when people pass by at night, it will automatically turn on, and after 30 seconds of lighting, it will automatically turn off.
   • Left light 3: Charging indicator, red light on means that the solar panel is charging normally, the light off means that the solar panel is not charging.

4. Battery indicator light:
   Right light 1: green light on, about 100% power
   Right light 2: green light on, about 70% power
   Right light 3: green light on, about 30% power
   Product Switches and Settings

|

---|---
OFF/ON Working Mode Cycle Button: power on/ light control mode -power off – power on/ sensor mode – power off| 3 Color Temperature Modes:
2700K, 4000K,6000K

Note: In the light control mode, the left indicator 1 is on; in the sensing mode, the left indicator “1” and “2” are both on.

Installation Step

Stick into ground

1. Spikes installation: first connect the three spikes, then connect the spike and lights with the fixing screws.
   

2. Adjust the angle of the lamp and the solar panel (note that the solar panel needs to be installed in the sunny position).

3. Turn on the light switch and set the desired brightness and color temperature.
   

4. Insert the light into the ground.
   

Wall Mounting

1. Drill 3 holes in the wall and put the expansion bolts into the drilled holes.
   

2. Connect the spike A and the lamp with fixing screws, adjust the angle of the lamp and the solar panel (note that the solar panel needs to be installed in the sunny position).

3. Turn on the light switch and set the desired brightness and color temperature.

4. Fix the lamp on the wall with screws.

FAQ

The lamp doesn't work.

1. Make sure the lamp is switch on. 2. The battery is out of power and charge the battery by solar panel in direct sunlight.

Lighting time is short.

1. The working time depends on the power which stores in the rechargeable battery.(The battery can only be fully charged ina sunny environment) 2. The more power it charges during the day, the longer time it works during the night.

Charing time.

1. Charging for over 8 hours is recommended. The charging time of solar products is affected by weather condition and installation location.

Working hours.

1. When the battery is fully charged, Light control type: work for about 6 hours in high light mode, and about 12 hours in low light mode. Induction type: work about 250 times.

Packing List

Spike set
Set screw
Solar Landscape Spotlights
Expansion bolts Pack
Instructions

Warning

1. There is a battery inside, high temperature and violent impact are prohibited. Keep away from fire.
2. Do not stare at the LED light-emitting surface closely for a long time to prevent the hurt to the eyes.
3. Under no circumstances should the luminaire be covered by a thermal pad or similar material.

Company name: Shenzhen Oumeike Lighting Technology Co. , Ltd.
Address:No.19-20,Anye Road, Yuanshan Street, Longgang District, Shenzhen, Guangdong, China (+86 0755-28608199)

C&E Connection E-Commerce (DE) GmbH
Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
E-mail: info@ce-connection.de Tel:+49 (069) 27246648

CET PRODUCT SERVICE LTD.
Beacon House Stokenchurch Business Park, Ibstone Rd,
Stokenchurch High Wycombe HP 14 3FE UK
Tel:+447419325266 E-mail: info@cetproduct.com

Contact: meikee@meikeelighting.com
Website: http://www.meikeelighting.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>