OSD AUDIO NERO-MODQ2 Bookshelf Monitor Speakers User Manual

: June 5, 2024
: OSD AUDIO

Table of Contents

OSD AUDIO NERO-MODQ2 Bookshelf Monitor Speakers
Specifications
Warranty
, etc. has been altered, defaced or removed • Normal wear and maintenance.
Accessories
Instructions for use
Mounting Information
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

OSD AUDIO NERO-MODQ2 Bookshelf Monitor Speakers

Specifications

Woofer| 3” (80mm) Fiber-Glass Cone, Rubber Surround| 2 X 3” (80mm) Fiber-Glass Cone, Rubber Surround
---|---|---
Tweeter| 1” (25mm) Silk Soft Dome| 1” (25mm) Silk Soft Dome
Power Handling| 50W RMS 100W Peak| 60W RMS 120W Peak
Freq Range| 101Hz – 20kHz| 100Hz – 20kHz
Sensitivity| 85dB| 85dB
Impedance| 8 Ohm| 8 Ohm
SPL| Max 101 dB – Peak 104 dB| Max 103 dB – Peak 106 dB
Termination| 4mm Three Way Binding Post| 4mm Three Way Binding Post
Grille| Perforated Metal| Perforated Metal
Cabinet| Sealed, Acoustic Suspension, MDF| Sealed, Acoustic Suspension, MDF
Mounting Hardware| Built-In Key Hole Mounts| Built-In Key Hole Mounts
Dimensions HWD| 8.11” x 4.76” x 4.84” (206mm x 121mm x 123mm)| 11.25” x 4.76” x 4.84 (286mm x 121mm x 123mm)

Warranty

All OSD AUDIO speakers have (10) year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period, OSD AUDIO will replace any defective part and correct any defect in workmanship without charge for either parts or labor

OSD AUDIO may replace returned products with a product of equal value and performance. In such cases, some modifications to the mounting may be necessary and are not OSD AUDIO’s responsibility

For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be performed by OSD AUDIO. The unit must be returned to OSD AUDIO at the owner’s expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor is damage resulting from abuse or from servicing performed by an agency or person not specifically authorized in writing by OSD Audio

OSD AUDIO sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any OSD AUDIO product purchased from an unauthorized dealer or another source, including retailers, mail-order dealers, and online sellers will not be honored or serviced under the existing OSD AUDIO warranty policy. Any sale of a product by an unauthorized source or in another manner not authorized by OSD AUDIO shall void the warranty on the applicable product.

Damage to or destruction of components due to the application of excessive power voids the warranty on those parts. In these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, you must email customer service at RMA@audiogeargroup.com for a Returned Merchandise Authorization (RMA) number then the unit must be shipped to OSD AUDIO at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the product(s) in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.

This Warranty Does Not Cover: Damage caused by abuse, accident, misuse, negligence, or improper operation (installation) • Any products that have been altered or modified • Any product whose identifying number of decals, serial

, etc. has been altered, defaced or removed • Normal wear and maintenance.

Accessories

OSD AUDIO NERO-MODQ2 Bookshelf Monitor SpeakersFig2

Instructions for use

Rotating aluminum logo on the MODQ3

Pull out the logo plate.
Rotate the logo as desired.
Release into place.

MODQ3 – Magnetic cabinet linking.

MODQ3 Cabinets can be linked together magnetically for centerchannel and stacking applications.

Suggestion: Connect 3 speakers together as left, center and right. Or stack two on top of each other and wire in series (4 Ohm load) for double the acoustic output. If stacking more than two, learn about wiring in series/parallel.

Optional 1/4” Ball-Joint Steel Brackets: NERO-MODQ-MOUNT

The MODQ2 and MODQ3 can be mounted on the wall via bracket with part #: -MODQ- MOUNT