MEIKEE QY-UF001 UFO Music Starry Projector User Manual
- June 6, 2024
- MEIKEE
Table of Contents
MEIKEE QY-UF001 UFO Music Starry Projector
Quick Start (avoid look steadily at LASER and Projector LED)
- Use TypeC cable connect projector typeC port and USB power;
- Long touch ON/OFF touch key until LED ON;
- Mobile phone or Computer Bluetooth connect “BT-UFLiSPK”
- Select you like projector or light color mode
Key and Interface
-
ON/OFF:
Long touch 1 second ON or OFF -
Projector mode:
Short touch switch 5 projector dynamic mode
Rhythm of music mode 6 color jump 6 color flash smooth *OFF -
Night LED mode:
Short touch switch 5 color night LED color
Orange Cyan Purple OFF *White
Dimming Long touch switch night LED light mode 60%–20%–100% -
Motor Speed:
Short touch switch motor speed
60% 100% OFF 40%
Laser Starry: Long touch switch ON/OFF Laser starry -
NEXT / VOL – :
Short touch choose NEXT song
Long touch volume down -
LAST / VOL + :
Short touch choose LAST song
Long touch volume up
LED and Interface
- LASER STARRY
- PROJECTOR LED
- USB type C port
- ROUND NIGHT LED
Remote Controlfunction Instruction
-
ON/OFF
-
Control device volume off
-
Night light and projector lamp brightness adjustment
-
Motor speed adjustment
-
Laser light switch
-
Night light and projection off
-
Turn night light on
-
Turn projection light on
-
Tinal keys(lights follow musical rhythm)
-
Projection Mode
-
Night light and main light color adjustment key
-
Short Press Next song
Long Press to Increase Volume -
Short Press last song
Long Press to reduce vllume -
Pause key
Specifications
| Product Model | QY- UF 001 |
|---|---|
| Projector LED | 2 * 1 . 5 W MAX |
| Laser starry | <5 m W |
| Night LED | 18 * 0 . 2 W MAX |
| Power Input | USB DC 5 V>1 A |
| Battery | 3 . 7 V 1800 m Ah optional |
| Dimensions | 150 * 95 mm |
| Environment | Temperature 0 – 40 C Humidity 0 – 95 % |
| Projection Coverage | 100 – 400 ft²( 10 – 40 m²) |
Package list
- Music starry projector *1pcs
- User manual * 1pcs
- USB cable * 1pcs
Notice
- Built-in battery charging instructions:Please use the national certification of the CCC adapter can output voltage 5V of electricity, the battery voltage below 3V will automatically shut down.When charging,the projection hood will be lit red,full of green light,full of electricity for about 5hours.
- Do not disassemble the product and battery.batteries are prohibited from disassembling,hitting, squeezing or putting into fire;Do not continue to use if severe swelling occurs;Do not place in a high temperature environment.
- This product for high-power LED and laser combination lamp projection lamp,please do not look directly at the lamp and laser lamp, if you feel uncomfortable please turn off immediately, do not let children use this product alone.
- In the ambient light strong light place to use this product will affect the projection effect. It is recommended to use in a relatively dark environment
- It is recommended to use this product in indoor or in the car with a roof lamp position,the ceiling height of more than 5 meters or no roof outdoor environmental impact projection effect.
- The light source of this product is not replaceable;When the light source ends, replace the entire luminaire.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any received,including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the users authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
class B digital device,pursuant to Part 15 of the FCC Rules.These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequence energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this equipment
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: .
- Reorient or relocate the receiving antenna. .
- Increase the separation between the equipment and receiver. .
- Connect the equipment into an autlet on a circuilt different from that to which the receiver is connected. .
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation,Science and Economic Development Canadas licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference,including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>