MONSTER MH22002 Clarity 8.0 ANC Earbuds User Guide
- June 6, 2024
- Monster
Table of Contents
CLARITY 8.0 ANC
Model No: MH22002
Quick Start Guide
Please read this Quick Start Guide carefully and keep it for future use.
Product Overview
In-ear Earphone x 2 (le & right)
Charging Case
USB-C Charging Cable
Ear Tips × 3 pairs (M size installed)
Quick Start Guide and Warranty Letter![MONSTER MH22002 Clarity 80 ANC Earbuds
-
Product Overview](https://manuals.plus/wp-content/uploads/2022/01/MONSTER- MH22002-Clarity-80-ANC-Earbuds-Product-Overview-300x225.png)
- Multi-Function Button (MFB )
- Microphones
- Ear Tip
- Charging contacts
- USB-C Charging Port
- Pair/Reset Indicator Light
- Charging Case Indicator Light
Power On/Off
Earphones will turn on when the charging case is opened. To turn off, place
the earphones in the charging case, charging will start when the cover is
closed.
Charging Case Wired/Wireless Charging
Besides using the included USB-C charging cable to charge the charging case,
the charging case can be charged by a compatible wireless charging device.
Noise Cancellation On/Off
Press and hold the MFB of the right earphone for 2 seconds to switch between
different modes. [Noise Cancellation Off] – [Ambient On] – [Noise Cancellation
On] Pairing
Left and right earphones will turn on and connected automatically when the
charging case is opened, “pairing” voice prompt will be heard.
For a new device connection, go to Bluetooth settings on your device and
search for new devices (new Monster device), “connected” voice prompt will be
heard once the earphones are paired.
When turning on, the earphone will try to connect to the last connected
device. To pair a new device, turn off the currently connected Bluetooth
device.
Connect other devices
Keep the earphones in the charging case and leave the cover open. Press and
hold the Pair / Reset to Factory Settings Button for about 5 seconds until the
light indicator starts to flash. It is now in pairing mode. Activate the
Bluetooth on your device and set it to search for new devices.
Volume Control
The earphones do not have a volume control function. After Bluetooth
connection, the volume level can be controlled on the connected device.
Call
Answer / End a call: Single tap the MFB.
Reject the call: Press and hold the MFB for about 2 seconds.
Music
Play/Pause music: Single tap the MFB.
Previous song: Double-tap the MFB of the left earphone.
Next song: Double-tap the MFB of the right earphone.
Voice Control
When the earphone is connected to the phone, press and hold the MFB of the
left earphone to activate the voice assistant.
Reset to Factory Settings
Open the cover of the charging case, keep the left & right earphones in the
charging case, press and hold the Pair/ Reset to Factory Settings Button for
10 seconds, the Pair/Reset Red Indicator Light will flash quickly, indicating
the earphones are restored to factory settings.
LED Indicator Guide
Mode | Description | Voice Prompt |
---|---|---|
Power On | “Power On” | |
Power Off | _ | “Power Off “ |
Pairing | The white LED indicator of the charging case flashes quickly | “Pairin |
”
g
Connected| After connected, the indicator light goes off| “Connected”
Earphones charging| When the earphone is charging, the indicator light of the
charging case flashes and turns off when it is fully charged| –
Charging case| During charging, the indicator light of the charging case is
on, and the light is off when it is fully charged| _
Cautions
- Please place the earphones in the correct location (L/R) for normal charging.
- Replacement of battery (on your own) is not recommended.
- Do not expose the battery (battery pack) to excessive heat such as direct sunlight or fire.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. The device has been
evaluated to meet general RF exposure requirements. The device can be used in
portable exposure conditions without restriction.
FCC ID:2AVD2-MH22002
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>