MEIKEE AC-TYP032 Garden Shed Light PIR Pendant User Guide
- June 14, 2024
- MEIKEE
Table of Contents
MEIKLE AC-TYP032 Garden Shed Light PIR Pendant
Thank you for purchasing MEIKEE products. To ensure a better shopping experience, please follow the instructions for use step by step. If you have any questions about our products, please contact our customer service, our after-sales team will reply to you at the first time and resolve any problems with the products.
E-mai l: meikee@meikeelighting.com
Warning
- The LED module can’t be replaced, you need to replace the entire lamp if it’s damaged or reach the service life.
- If the wire is damaged, the lamp can no longer be used and needs to be scrapped.
- If the casing breaks or water enters, the lamp can no longer be used and needs to be scrapped.
- Do not stare at the LED lighting-emitting the luminaire surface closely for a long time, to prevent the hurt of your eyes.
- Under no circumstances should the luminaire be covered by a thermal pad or similar material.
- The lamp required a professional electrician to install.
- IP54 Protection, the product cannot be used in the rain or immersed in water, otherwise it may cause leakage.
- The product does not contain push-in terminals,
you need to prepare your own terminals according to the installation and wiring requirements.
Parameters
Model| Power| Rated Voltage| Color temperature| Lumen| IP Rating| Input Lead|
Ta
---|---|---|---|---|---|---|---
AC-TYP032| 32W| AC85-265V/50-60HZ| 2700K| 2700| IP54| LIN| -25- 4o·c
AC-TYP032| 32W| AC85-265V/50-60HZ| 6500K| 3000| IP54| LIN| -25- 4o·c
Function: Sensing distance 5-8 meters
Light control+Sensing mode: In the nighttime, the light will be on for 30 seconds when the motion is detected.
Component and Structure Diagrams
- CD Metal Hook
- Motion sensor
- Lamp Panel
- Shell
- Lampshade with lens
Installation Steps
- Connect the wires
- Suspension installation, adjust the angle of light heads
Reminder:
The detection distance depends on the ambient temperature. If the ambient
temperature is close to or higher than the human body temperature, the sensing
detection distance will be shorter. This means you need to get closer to the
light. Conversely, if the ambient temperature is lower than the human body
temperature, the sensing detection distance will be farther.
Routine Maintenance
- To ensure the light working normally, please clean the lamps regularly.
- Make sure the power is off before maintenance.
- To avoid damage to the lamp, please do not clean it with chemicals.