MEIKEE B04-23SP-RGB-M-C 6 in 1 Solar RGB Garden Lights Landscape Lighting Installation Guide

MEIKEE B04-23SP-RGB-M-C 6 in 1 Solar RGB Garden Lights Landscape Lighting

Solar RGB Spotlight Manual
Thank you for purchasing MEIKEE products. To ensure a better shopping experience, please follow the instructions for use step by step.
If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first time and resolve any problems with the products.
E-mail: meikee@meikeelighting.com

ATTENTION

1. Because the solar panel is charging during the day, the light control mode will not light up during the day, if you want to test the product during the day, please disconnect the solar panel connection cable or cover the solar panel with an object to simulate the night environment.
2. The working time of the light is related to the sunlight charging time, sunny day charging effect will be better than the rainy day. such as continuous rainy weather, the light may not be turned on because it’s not charged, but wait for the sunlight is sufficient, it will be charged and light up again.
3. Please install the product in a place with sufficient sunlight, note that a place like a tree shade or glass will affect the charging effect.
4. When you receive the product for the first time, please fully charge in full sunlight before using it (at least 8 hours or more), to ensure the duration of the light.
5. Please clean the solar panel regularly to ensure the charging effect.
6. Please do not disassemble and modify the product by yourself to avoid product damage.
7. The product contains batteries, please keep it away from fire, this product is waterproof IP66. Do not use it in water.

Parameters Table

Product models/Size/Accessories

Solar panel installation

Note : The solar panel needs to be installed in a place where there is sufficient sunlight. Note that places like tree shade or glass will affect the charging effect.

Spotlight installation

How to Work

Wiring and mounting bracket

Control box and Light and solar panel extension cord connections:
Connect the male and female ends of the extension cord and tighten the waterproof cap.

Control box function introduction

1. Input: Charging Input Cable
2. : Charging Indicator Light (Red Light) — Always on during charging (the indicator light will change with the charging voltage and high and low brightness)
3. 1. Brightness Indicator: Low Light – Green Light High Light – Red Light
4. Working Indicator Light (Green Light) – The indicator light is always on during work (indicating that the battery box can work fine)
5. ON / After the switch is turned on, the working indicator is always on (green light)
6. Battery Indicator Light 30% Power-—1 light is always on 70% Power – 2 lights are always on 100% Power —- 3 lights are always on Less than 30% Power – no indicator lights
7. Output: Output Cable

Remote Control Introduction

Monochrome Key : Red (R) / Green (G) / Blue (B) / Tri-color Mixed White Light (W) / Cyan / Purple / Indigo Blue / Orange / Yellow / Magenta – A total of 10 monochrome options.

Memory Function : After turning off the light, it will return to the illumination mode it was in before being turned off when turned on again.

Warning

1. There is a battery inside, high temperature and violent impact are prohibited. Keep away from fire.
2. Do not stare at the LED light-emitting surface closely for a long time to prevent the hurt to the eyes.
3. Under no circumstances should the luminaire be covered by a thermal pad or similar material.

Company name: Shenzhen Oumeike Lighting Technology Co., Ltd.
Address : No. 19-20, Anye Road, Yuanshan Street, Longgang District, Shenzhen, Guangdong, China (+86 0755-28608199)
Contact: meikee@meikeelighting.com
Website: http://www.meikeelighting.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>