MEIKEE B04-21FL0305-M-D Solar RGB Floodlight Color Changing Lights User Manual

MEIKEE B04-21FL0305-M-D Solar RGB Floodlight Color Changing Lights User Manual

Thank you for purchasing MEIKEE products. To ensure a better shopping experience, please follow the instructions for use step by step.

If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first time and resolve any problems about the products.

E-mail: meikee@meikeelighting.com

Attention

1. The luminaire should be placed in suggested installation height, please do not prolonged stare into the luminaire for more than 3 seconds within 2 meters.
2. The light source is not replaceable, when it reaches the end of its life, the whole luminaire needs to be replaced.
3. Because the solar panel is charged during the day, it will not turn on during the day. If you want to test the light during the day, please cover the solar panel or go to a dark room to test. (Do not shine the light on the solar panel in a dark environment, otherwise the light will flicker with high frequency)
4. The working time of the lamp is related to the charging time. The charging effect on a sunny day will be better than that on a rainy day. In the case of continuous rainy days, the light may not be turned on because it is not charged. Please charge 8H when the sunlight is sufficient, the lamp will turn on again.
5. Please install the solar panel in a place that can get sufficient sunlight. Note that the place like tree shade or glass will affect the charging effect.
6. When you receive the product for the first time, please fully charge it before using it (at least 8 hours or more) to ensure the duration of the light.
7. Please clean the solar panel regularly to ensure the charging effect.
8. Do not disassemble and modify the product by yourself to avoid product damage.
9. Please stay away from fire sources. The waterproof rating of this product is IP66. Do not use it in water.

Parameter

Model| Solar Panel| Working
Voltage| Color
Temperature| Lighting
Angle| Projection
Distance| Waterproof
Rating| Extention
Cord| Control Method| Lamp body
Material| Ta
---|---|---|---|---|---|---|---|---|---|---
SL-FLO5-A| 6V/4W| 3V/DC| 2700K/4000K/6000K| Al| A2| Al| A2| IP66| 5M| Light Control| PC| -25 C —40 C
120°| 25°| 3M| 5M
SL-FLO5-B| 6V/3W| 3V/DC| 2700K/4000K/6000K| 120°| 3M| IP66| 5M| Light Control| PC| -25 C —40 C
SL-FLO3-A| 6V/4W| 3V/DC| 2700K/4000K/6000K| 25°| 5M| IP66| 5M| Light Control| PC| -25 C —40 C
SL-FLO3-B| 6V/4W| 3V/DC| 2700K/4000K/6000K| 120°| 3M| IP66| 5M| Light Control| PC| -25 C —40 C

Product models/size/accessories

SL-FL05-A

Voltage: 6V
Screw bag x2

SL-FL05-B

Voltage: 6V S
crew bag x2

SL-FL03

Voltage: 6V
Screw bag x2

Solar Panel Installation

Ground-mounted

Wall mounted

Note: The solar panel needs to be installed in a place where there is sufficient sunlight. The installation location like tree shade or glass will affect the charging effect.

Flood Light Installation

**Ground-mounted

**

**Wall mounted

**

How to Install (SL-FL03)

Step 1: Drill two holes on the installation wall (the position of the holes refer to the installation holes of the installation base).

Step 2: Drive in bolts and screws to fix the mounting base on the wall.

Step 3: Turn on the switch of the lamp, set the mode and angle of the lamp, and then tighten the screw to fix the lamp on the mounting base.

Wiring guide

Connect the male and female ends of the extension cord and tighten the waterproof cap.

Light Control Working Mode

**Charge during the day

**

**Lights up at night

**

Product Detail

1. Light control switch function:

2. Left button:
   ON/OFF: Press once to turn on (default low light mode)-press again is high light mode-press again to turn off (low light-high light-off)

3. Right button:
   Color temperature switch: press the switch 2700K-4000K-6000K in cycle.

4. Working indicator light:
   Left light 1: indicator: Green light on indicates that the power supply is normal, and off light indicates that the battery is not supplying power.
   Left lights 2: high/low light mode indicator: green light on means high light mode, off light means low light mode.
   Left lights 3: solar panel indicator: red light on means that the solar panel is charging normally, the light off means that the solar panel is not charging.

5. Battery indicator light:
   Right light 1: green light on, about 100% power
   Right light 2: green light on, about 70% power
   Right light 3: green light on, about 30% power

FAQ

Q: The lamp doesn't work.

A: 1. Make sure the lamp is switch on. A: 2. The battery is out of power, please charge the battery by solar panel in direct sunlight.

Q: Lighting time is short.

A: 1. The working time depends on the power which stores in the rechargeable battery. (The battery can only be fully charged in a sunny environment) A: 2. The more power it charges during the day, the longer time it works during the night.

Q: Chargina time.

A: Charging for over 8 hours is recommended. The solar product's charging time is affected by weather condition and installation location.

Q: Working hours.

A: When the battery is fully charged, light control type: work for about 6 hours in high light mode, and about 12 hours in low light mode.

Warning

1. There is a battery inside, high temperature and violent impact are prohibited. Keep away from fire.
2. Do not stare at the LED light-emitting surface closely for a long time to prevent the hurt to the eyes.
3. Under no circumstances should the luminaire be covered by a thermal pad or similar material.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>