MEIKEE B04-22SP-M-B 6 In 1 Solar Spotlights Outdoor Garden Spike Light User Manual
- June 14, 2024
- MEIKEE
Table of Contents
User Manual
Solar Spotlights
B04-225P-M
B
Thank you fo purchasing MEIKEE products. To ensure a better shopping
experiance, plaase followthe instructions for use siep by step 1fyou have any
questions about our products, please contact our Gustomer service. our aftar-
sales team il contact you atthe irsttime ‘and resolve any problems about the
producis.
E-mail: meikee@meikeelighting.com
Attention
-
The luminair should be posiioned at suggestod nstalation height, please do not prolonged stare ito he luminare for more than 3 Seconds within 2 melers.
-
The light source s not replaceable, when i reaches the end of se, he whole luminairs needs o be replace
-
Bocause the solar panel is charged during the day, t wll ot tum on during tho day. I you want 0 test th lght during the day, please cover the solar panel or go 10 a dark roomo est (Do nt shin the ight on the solar paneli a dark environment, oterwise the ight il ficker wih high requency)
-
The working ime of the lampi related 1 the chargingt. The charging ffect on a sunny day wil be beter than tha on a ainy day.
In tho caso of continuous ainy days, the ight may not be tumed on because ts not cherged. Please charge &H when the suniigh s sufficien,the lamp wil tun on again. -
Please install the soar panel in 2 place withsuffient sunght, Note thal places ke roe shado or gass wil affect the charging effect
-
When you recaive the product or the frsttime, please flly charge i befora using 1 (ateast & hours or more) o ensure the duraton of hegt
-
Plsase ciean the solar panel regularty to ensure the charging effect
-
Do notdisassemble and modty the product by yoursel to avoid procuct damage.
-
Please stay away from fre sources. The waterproof rating of this product s 1P68. Do notuse i n water
Parameters Table
product models/size /accessories
Solar panel installation
Note: The solar panel needs fo be installed i a lace where there is suffiiontsunliht. Noto that laces ke ree shade or gass wil afect the changing sffect.
Spotinght installation
How to Wark
Wiring and mounting bracket
Gontrol box and Light and solar panel extension cord connectios: Connect the male and female ends of the extension cord and ihten the waterproof cap.
Control box function introduction
-
input: Input st
-
: Charging Indicator (The indicator lights up when charging)
1.2: Power Indicator (In low brightness mode, LED “2’ remains on; in high brightness mode, LED *1” and “2” are both on) -
Power Switch: (Onidefault low brightness – High brightness
– Off and cycle) -
Color Temperature Switch: (000K- 4000K – 2700K and cycle)
-
Battery Indicator: (One light stays on means 30% battery; 2 lights stays on means 70% batlery; 3 lihts stays on means 100% battery)
-
Output: Outputlead
FAQ
Q: The lamp doesn't work.
A: 1. Make sure the lamp is switch on. A: 2. The battery is out of power and charge the battery by solar panel in direct sunlight.
Q: Lighting time is short.
A: 1. The working time depends on the power which stores in the rechargeable battery.(The battery can only be fully charged in a sunny environment) A: 2. The more power it charges during the day,the longer time it works during the night.
Q: Charing time
A: 1. Charging for over 8 hours is recommended.The solar products' charging time is affected by weather condition and installation location.
Q:Working hours
A: 1. When the battery is fully charged, Light control type: work for about 6 hours in high light mode, and about 12 hours in low light mode.
Warning
- There s s battery inside. high temperature and violent impact areprohibited. Kaop away from fire.
- Do not stare at the LED light-emitting surface closely for a long time to prevent the hurl o the eyes.
- Under no circumstances should the lumin © be covered by & thermal pad or similar material.