Danby DAC080EBIBDB Wireless Air Conditioner Instruction Manual

Danby DAC080EBIBDB Wireless Air Conditioner

Product Information

This product is a wireless application developed by Danby Products Ltd. It comes in two models: DAC080EBIBDB and DAC140EBIBDB. Please read the manual carefully before connecting to the wireless application. Keep the manual for future reference. The illustrations provided are for reference purposes only; The app’s interface may vary slightly on your device.

Specifications

• Manufacturer: Danby Products Ltd
• Models: DAC080EBIBDB, DAC140EBIBDB
• Manufacturing Date: 2024.02.28
• Manufacturing Locations: Guelph, Ontario, Canada and Findlay, Ohio, USA
• Printed: China

Product Usage Instructions

Connecting the Wireless Application

1. Download and install the application on your device from the app store.
2. Open the application and follow the on-screen instructions to set up your account.
3. Ensure your device’s wireless connection is enabled.
4. Follow the in-app prompts to connect your device to the wireless application.

Using the Application
Once connected, you can use the wireless application to control various functions of your Danby product remotely. Some common features include temperature adjustment, scheduling, and monitoring.

Troubleshooting
If you encounter any issues with the wireless application, refer to the troubleshooting section of the manual or contact customer support for assistance.

Frequently Asked Questions

Q: Can I use the wireless application on multiple devices?

A: Yes, you can typically use the application on multiple devices as long as they are compatible with the app and connected to the same account.

Q: How do I update the wireless application?

A: Updates for the application are usually available through the app store on your device. Check for updates regularly to ensure you have the latest features and improvements.

Q: Is the wireless application compatible with all Danby products?

A: The compatibility of the wireless application may vary depending on the specific model of your Danby product. Refer to the product manual or contact customer support for compatibility information.

Model Number

• DAC080EBIBDB
• DAC140EBIBDB

Important Note:
Read this manual carefully before connecting the wireless application. Make sure to save the manual for future reference. Illustrations are for reference purposes only. The app may look slightly different on your device.

SPECIFICATION

• Model Number: DAC080EBIBDB, DAC140EBIBDB
• Wireless Module Model Number: US-SK105
• Antenna Type: Printed PCB Antenna
• Frequency Band: 2400-2483.5Mhz
• Operation Temperature: 0°C ~ 45°C (32°F ~ 113°F)
• Operation Humidity: 10% ~ 85%
• Power Input: DC 5V/300mA
• Maximum TX Power: <20dBm

Note:
Danby will not be liable for any issues or problems caused by the internet, wireless router, or any other Smart devices. Please contact the original provider for further help with these issues.

DOWNLOAD AND INSTALL THE APP

Caution:
The below QR codes are used to download the wireless connection app. They are different than the QR code that may appear on the side of the unit below the rating plate.

• Android users: scan the below QR code or go to Google Play and search “Danby” to download and install the wireless app.
• iOS users: scan the below QR code or go to the APP Store and search “Danby” to download and install the wireless app. If you see more than one version of the app in the APP Store, choose the one named “Danby”.

PREPARATION

• Ensure your mobile device is connected to your wireless router. Also, ensure that the wireless router is connected to the internet.
• Ensure your mobile device is already connected to the wireless network that you wish to use. Remove any other unused wireless networks from your deivce history to avoid confusion.
• Images in this manual are for instructional purposes only. The actual app may appear slightly different.

CREATE ACCOUNT

When you open the app for the first time, you will be asked to read and agree with the Data Privacy Notice.

1. Press “Create Account” or press “Sign in with a third party account.”
2. Enter your email address and password and then press, “Register”.

NETWORK CONFIGURATION

• It may be helpful to remove unused wireless networks from your device memory to make sure you are connecting to the correct network.
• Make sure the wireless device and network are working properly before beginning to connect the wireless appliance. You must finish all the steps for connection within 8 minutes of entering AP mode or the connection will reset and you will need to activate AP mode again to restart the connection.
• There are two ways to connect the wireless feature, by Bluetooth connection or by manual selection. We recommend using the Bluetooth connection as it is easy and fast and will save you time. If the Bluetooth connection does not work, follow the steps for manual connection.

To begin the connection process, plug in the appliance and then press and hold the wireless button on the control panel for 3 seconds. “AP” will show on the display. This stands for “Access Point” and means that AP mode is activated and the wireless receiver in the appliance is ready to make a connection.

Network Configuration by Bluetooth Scan

• Ensure that your Bluetooth is working correctly before proceeding. From the home page of the app, press “Add Device”.
• The app will scan for nearby devices automatically.
• Wait for the smart device to be found and then choose it from the provided list.
• Select the desired wireless network from the list and enter the password.
• Wait for the network to connect to the appliance.
• Successful configuration will be indicated by a checkmark.
• You can now see the appliance in the device list. You can choose from the recommended names or you can set a custom name.
• The appliance will now appear on your app home page.

Network Configuration by Manual Selection

• If the Bluetooth connection does not work, you can manually choose the appliance to add it. From the home page of the app, press “Add Device”.
• Choose the type of appliance from the provided list.
• Plug in and power on the appliance.
• If the display does not automatically show “AP”, press and hold the “Swing” button for 3 seconds until “AP” shows on the display.
• If you are using an Android phone, you may have to choose the connection method. Press “Manual Setup”. This will not be necessary on iOS.
• Go to the WLAN settings in your wireless device. Connect to the network “net_ac_XXXX” using password “12345678”. This will connect your wireless device to the appliance.
• Choose your home network from the suggested list and enter your network password.
• Configuration is successful.
• You can now see the appliance in the device list. You can choose from the recommended names or you can set a custom name.
• The appliance will now appear on your app home page.
• Note: When the manual connection is completed, the appliance status may still show “offline”. To correct this, either refresh the device list in the app or turn the appliance off and then on again and the app should show the appliance as “online” within a few minutes.
• When the wireless connection is active, AP will disappear from the display and the wireless connection light on the control panel will illuminate.

USING THE APP

Ensure that both the wireless device and the appliance are connected to the internet. Choose the appliance from the home screen to open the control panel. From this screen, you can control the on/off status, the operation mode, the temperature, the fan speed, and so on.

SPECIAL FEATURES

• Favorite Setting
  Press to set a favorite mode and temperature setting.

• Schedule
  You can set the appliance to turn on and off based on a set schedule by pressing “Schedules” and following the prompts.

• Sleep Curve
  Customize the sleep function by setting your own target temperature. Press and drag to change the default curve to your desired temperatures.

• Check
  You can use this feature to check the current operational status of the appliance.

• Units
  Press to change the display temperature between Fahrenheit and Celsius .

Share QR Code
The appliance can be controlled by multiple users at the same time using the Share QR Code feature. Click “Share QR Code” and the QR code will display. The other user should log into the wireless app and press “Add Device” and then scan the QR code. This will add the appliance to their wireless app.

APP DECLARATION

Applicable system: Android and Apple iOS

• The app is not compatible with software versions below 4.4 Android and 9.0 iOS.
• Due to the variables involved in your specific installation, we must advise that not all Android and iOS operating systems will be compatible with the wireless app. We cannot be responsible for any issues resulting from incompatibility.

Wireless Safety Strategy
The wireless application only supports WPA-PSK/WPA2-PSK encryption. WPA- PSK/WPA2-PSK encryption is recommended.

Cautions

• Due to different network situations, control processes might sometimes return a time-out error. If this occurs, unplug the appliance and plug it back in. If it does not automatically reconnect, you may need to reconnect the appliance to the app.
• Your smart device camera requires at least 5 million pixels to be able to scan a QR code.
• The wireless app is subject to updates without prior notice for functional improvement. The actual network connection process may be slightly different than outlined in the manual. The actual process shall prevail.

DECLARATION OF CONFORMITY

• Contains FCC ID: 2ADQOMDNA21
• Contains IC: 12575A-MDNA21

This device complies with Part 15 of the FCC Rules and it contains license- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference;
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Only operate the device under the instructions supplied. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Danby Products Ltd, Guelph, Ontario, Canada N1H 6Z9 Danby Products Inc, Findlay, Ohio, USA 45840.

Printed in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>