myStrome WiFi Switch Zero Installation Guide
- June 3, 2024
- myStrome
Table of Contents
myStrome WiFi Switch Zero
Download the myStrom app
Launch app
Open a free account or connect with your existing one.
Add WiFi Switch Zero
AII Done
Ports, Boutons et LED
LED indicator
| Off | WiFi Switch Zero turned off |
|---|---|
| White | WiFi connection OK and connected to the myStrom service |
| White, blinking | WiFi pairing mode (WPS) |
| Red | Starting up |
| Red, blinking | Connection in progress |
Red, blinking
slowly
| Access Point mode
On/off button
Press| Switches the connected device
on and off manually.
---|---
Other functions
WPS| Press and hold the on/off button for 3-5 seconds until the LED flashes
white slowly.
Reset| Press and hold the on/off button for 1 0 seconds until the LED flashes
white quickly.
FAQ & Support
WiFi Switch Zero not working?
Restart the WiFi Switch Zero
Simply unplug and plug it in again.
Plug the WiFi Switch Zero close to your DSL Router
If the LED lights up in white, the WiFi Switch Zero works perfectly and
could have suffered from a weak WiFi signal in its previous location.
Reconnect the WiFi Switch Zero
Activate WPS first on your Router, then on your WiFi Switch Zero.
Further help & contact
mystrom.ch/support
myStromAG
c/o tiko Energy Solutions AG
8004 Zurich/ Switzerland
mystrom.ch
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>