Danby DDR050BLPBDB-RF Dehumidifier with Pump Refurbished Owner’s Manual

June 2, 2024
Danby

Danby DDR050BLPBDB-RF Dehumidifier with Pump Refurbished

Danby-DDR050BLPBDB-RF-Dehumidifier-with-Pump-Refurbished-
product

Scan or visit www.danby.com/product-resources/ and enter your model number in the search for a full version of the owner’s manual.

Danby-DDR050BLPBDB-RF-Dehumidifier-with-Pump-Refurbished-fig-
\(1\)

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAFETY REQUIREMENTS
This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities may be different or reduced, or who lack experience or knowledge unless such persons receive supervision or training to operate the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

To avoid the risk of electric shock, do not operate this dehumidifier in an area that is likely to accumulate standing water. If this condition develops, disconnect the power supply before stepping into the water. Do not store or use combustible materials such as gasoline or other flammable vapours or liquids in the vicinity of this or any other appliance. Do not insert fingers or other objects into grills or openings in the appliance.

Do not cover or block the intake and exhaust openings. Do not operate the appliance without the filter installed. Do not operate the appliance near heat sources. This appliance is intended for indoor, and residential applications only. Do not use this dehumidifier outdoors. Do not use this dehumidifier for commercial or industrial applications.

GROUNDING INSTRUCTIONS

This appliance must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire for the electrical current. This appliance has a cord that has a grounding wire with a 3-prong plug. The power cord must be plugged into an outlet that is properly grounded. If the outlet is a 2-prong wall outlet, it must be replaced with a properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the appliance is designed for.

WARNING – Improper use of the grounding of the plug can result in a risk of electric shock. Consult a qualified electrician or service agent if the grounding instructions are not completely understood, or if doubt exists as to whether the the appliance is properly grounded. Do not connect the appliance to extension cords, adapters or together with another appliance in the same wall outlet. Do not splice the power cord. Do not under any circumstances cut or remove the third ground prong from the power cord. If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similar qualified person to avoid hazards.

OPERATING INSTRUCTIONS

FEATURES
Danby-DDR050BLPBDB-RF-Dehumidifier-with-Pump-Refurbished-fig-
\(2\)

  1. Control panel
  2. Handles (both sides)
  3. Water bucket
  4. Water level indicator
  5. Air outlet
  6. Air filter
  7. Continuous drain outlet
  8. Power cord storage strap
  9. Power cord storage band
  10. Power cord
  11. Pump drain outlet

LOCATION

  • Place the dehumidifier on a smooth, level floor that is strong enough to support the appliance with a full bucket of water.
  • Do not place the dehumidifier on carpeting as this can block airflow around the appliance.
  • Do not force casters to move over carpeting as the appliance can become unbalanced and spill water.
  • To maintain efficiency, operate the appliance in an enclosed area. Keep nearby doors and windows closed.
  • Maintain a minimum clearance of 40 cm (16 inches) around the air outlets and 20 cm (8 inches) on the other sides of the appliance to allow for proper air circulation.

CONTROL PANEL

  1. Auto defrost light: The light will illuminate when frost builds up on the evaporator coils. The compressor will cycle off and the fan will continue to run until the frost melts.
  2. Bucket full light: The light will illuminate when the bucket is full or incorrectly positioned inside the cabinet. The compressor and fan operation will stop as a safety feature. When the bucket is emptied or correctly re-positioned the dehumidifier will resume operation automatically.
  3. Display: Shows the actual (± 5% accuracy) room humidity level in a range of 30% to 90%. Otherwise, displays selection when programming humidity or timer.
  4. Pump button: Press to activate the drain pump. Ensure that a drain hose is connected before starting the pump.
  5. Smart dehumidifier: This function will automatically adjust the humidity level with the fluctuating room temperatures. The humidity level cannot be adjusted in this setting, it will stabilize between 45% – 55%. Press the humidity adjust buttons to cancel this feature.
  6. Filter button: The check filter light will flash after 250 hours of operation. After cleaning the filter, press the filter button to turn off the light. Press and hold the filter button for 3 seconds to activate the wireless feature.
  7. Continuous button: Press to activate the continuous dehumidifying operation.
  8. Fan button: Press to select normal or high fan speed. The light will illuminate when set to high fan speed.
  9. Timer button: Press to set the timer.
  10. Humidity adjusts buttons: The humidity level can be set within a range of 35% to 85% relative humidity in 5% increments. For drier air, set to a lower percentage value. For more damp air, set a higher percentage value.
  11. Power button: Press to turn the dehumidifier on or off.Danby-DDR050BLPBDB-RF-Dehumidifier-with-Pump-Refurbished-fig- \(3\)

LIMITED APPLIANCE WARRANTY

This quality product is warranted to be free from the manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer. This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter “Danby”) or by an authorized distributor of Danby and is non-transferable.

TERMS OF WARRANTY
Plastic parts are warranted for thirty (30) days only from the purchase date, with no extensions provided.

First Year
During the first twelve (12) months, any functional parts of this product found to be defective will be repaired or replaced, at the warrantor’s option, at no charge to the ORIGINAL purchaser.

Service
It will be the consumer’s responsibility to transport the appliance (at their own expense) to a service depot for repair. Contact your nearest authorized Danby service depot, where service must be performed by a qualified service technician. If service is performed on the unit by anyone other than an authorized service depot, or the unit is used for commercial application, all obligations of Danby under this warranty shall be void. Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS
Save as herein provided, by Danby, there are no other warranties, conditions, representations or guarantees, express or implied, made or intended by Danby or its authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statute is hereby expressly excluded. Save as herein provided, Danby shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or property caused by the unit.

GENERAL PROVISIONS
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

  1. Power failure.
  2. Damage in transit or when moving the appliance.
  3. Improper power supply such as low voltage, defective house wiring or inadequate fuses.
  4. Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions (extremely high or low room temperature).
  5. Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
  6. Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc.
  7. Service calls result in customer education.
  8. Improper Installation (ie. Building-in of a free-standing appliance or using an appliance outdoors that is not approved for outdoor application).
  9. Proof of purchase date will be required for warranty claims; so, please retain the bill of sale. In the event warranty service is required, present this document to our AUTHORIZED SERVICE DEPOT.

Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Telephone: 519-837-0920 FAX: 519-837-0449

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Danby User Manuals

Related Manuals