Danby DPA050CEWDB Wireless Connect User Guide

Danby DPA050CEWDB Wireless Connect

Product Information

• Model Number: DPA050CEWDB
• Manufacturer: Danby Products Ltd
• Location: Guelph, Ontario, Canada N1H 6Z9
• Trademark: Danby Products
• Wireless Connection Module Model Number: TYJW2.0
• Antenna Type: On-Board PCB Antenna
• Frequency Band: 2412MHz – 2472MHz
• Power Input: DC 5V / 100mA
• Maximum TX Power: [Missing in the provided text]

Product Usage Instructions

Installation

1. Place the air conditioner in a suitable location with proper ventilation.
2. Ensure the unit is connected to a power source with the provided DC 5V / 100mA power input.
3. Make sure the antenna is securely attached for optimal wireless connectivity.

Operation

1. Turn on the air conditioner using the designated power button.
2. Set the desired temperature and fan speed using the control panel.
3. The on-board PCB antenna will facilitate wireless communication within the specified frequency band.

Specifications

• Model Number: DPA050CEWDB
• Wireless Connection Module Model Number: TYJW2.0
• Antenna Type: On-Board PCB Antenna
• Frequency Band: 2412MHz – 2472MHz
• Power Input: DC 5V / 100mA
• Maximum TX Power: [Missing in the provided text]

Frequently Asked Questions (FAQ)

• How do I clean the air filter?
  To clean the air filter, gently remove it from the unit and wash it with mild soap and water. Allow it to dry completely before reinserting it into the air conditioner.

• Can I use this air conditioner in a small bedroom?
  Yes, this air conditioner is suitable for cooling small to medium-sized rooms, including bedrooms.

Important Note: Read this manual carefully before connecting the wireless application. Make sure to save the manual for future reference. Illustrations are for reference purposes only. The app may look slightly different on your device.

SPECIFICATION

• Model Number: DPA050CEWDB
• Wireless Connection Module Model Number: TYJW2.0
• Antenna Type: On-Board PCB Antenna
• Frequency Band: 2412MHz – 2472MHz
• Power Input: DC 5V / 100mA
• Maximum TX Power : <20dBm
• Minimum specifications on a Smart Phone: Android 5.0 version or higher, IOS 10.0 version or higher
  Note: Danby will not be liable for any issues or problems caused by the internet, wireless router or any other Smart devices. Please contact the original provider for further help with these issues.

DOWNLOAD AND INSTALL THE APP

Caution: The QR code used to download the wireless connection APP in this manual may be different than the QR code that may appear on the side of the unit below the rating plate.

PREPARATION

• Ensure your mobile device is connected to your wireless router. Also ensure that the wireless router is connected to the internet.
• Ensure you mobile device is already connected to the wireless network that you wish to use. Remove any other unused wireless networks from your deivce history to avoid confusion.
• Images in this manual are for instructional purposes only. The actual app may appear slightly different.

DOWNLOAD AND INSTALL THE APP: Method 1

• Android Smart Phone:
  Open the Google “Play Store” and search “SmartLife-SmartHome”, download and install the APP.

• IOS Smart Phone:
  Open the Apple “APP Store” and search “SmartLife-SmartHome”, download and install the APP.
  NOTE:
  Please enable the following permissions for this APP when installing to prevent any issues when operating. Storage / Location / Camera / Wireless Connection / Bluetooth

APP ACTIVATION

When first entering the APP, it will display the activation interface. You can activate the APP in 2 different ways.

QR Code
Click the “SCAN” button and scan the QR code below.

Activation Code
Input the “Activation Code” words below then click the “Activate” button.

REGISTRATION

Create Account

• Select “Register”, read the Privacy Policy and User Agreement, tap on “Agree”
• Choose the country by searching or sliding down the screen.
• Enter your E-mail address then tap the button “Get Verification Code”
• Enter the verification code you received in your email.
• Set the Password with 6 – 20 characters including characters and numbers.
• Tap “Done”

Existing Account

• Tap “Log in with Existing Account”
• Enter the registered account and password
• Tap “Login”

Password Reset or Forgotten

• Tap “Forgot password”
• Enter account (E-mail address)
• Tap “Get verification code”
• Enter code received in E-Mail
• Set new password and tap “Done”

ADD DEVICE

• Please power on the appliance, but do not press the button to turn it on.
• The screen will appear as below

1. Reset Wi-Fi
   There are three methods to reset the Wi-Fi module.

2. Press the “FAN” button on the control panel 6 times within 4 seconds;

3. Hold the “ON/OFF” button on the control panel for roughly 5 seconds;

4. Hold the “Mode” button on the control panel about 3 seconds.
   Please wait about 10 seconds, until the LED screen show “CF”, and connect it again.

5. Click in the upper right corner of the “Home” screen.
   Or Click “Add Device“ in the upper right corner of the “Home” screen. Then choose “Portable Air Conditioner”.

3. Enter the Wi-Fi password, ensuring it matches the one currently connected to your smartphone, and then proceed by tapping ‘Next’.
   Note: Please make sure the “Password” is correct, or the connect will be failure.

4. The appliance display will sequentially show the connection progress percentage along with the indicators ‘PP,’ ‘SA,’ and ‘AP’ lighting up.

   • PP means “Searching the router”
   • SA means “Connected to the router”
   • AP means “Connected to the server”

5. When the Wi-Fi symbol illuminates on the appliance’s control panel, it indicates a successful Wi-Fi connection.

6. If the wireless connection fails, please try to reset the wireless connection module and connect it again.
   Note: Every time reset the Wi-Fi, must wait about 10 seconds.

TROUBLESHOOTING

APP DECLARATION

Applicable system: Android and Apple iOS

• The app is not compatible with software versions below 5.0 Android and 10.0 iOS.
• Due to the variables involved in your specific installation, we must advise that not all Android and iOS operating systems will be compatible with the wireless app. We cannot be responsible for any issues resulting from incompatibility.

Cautions

• Due to different network situations, control processes might sometimes return a time out error. If this occurrs, unplug the appliance and plug it back in. If it does not automatically reconnect, you may need to reconnect the appliance to the app.
• Your smart device camera requires at least 5 million pixels to be able to scan a QR code.
• The wireless app is subject to updates without prior notice for functional improvement. The actual network connection process may be slightly different than outlined in the manual. The actual process shall prevail.

DECLARATION OF CONFORMITY

Contains FCC ID: 2-ANDL-TWYE1S
Contains IC: 23243-TYWE1S
This device complies with Part 15 of the FCC Rules and it contains licence- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference;
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Only operate the device in accordance with the instructions supplied. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>