Ciro Chicane Shift Peg Installation Guide
- July 15, 2024
- Ciro
Table of Contents
Ciro Chicane Shift Peg
Product Information
Specifications
- Product Name: Chicane™ Shift Peg
- Manufacturer: Ciro3D
- Model Number: G0061301
Product Usage Instructions
Installation
- Park your motorcycle on a level surface and allow the engine to cool before starting the installation process.
- Remove the OEM allen screw and shift peg. (Refer to Fig. 1)
- Place the lock washer on the provided screw, insert it through the large end of the shift peg, and attach it to the shift arm.
- Tighten the screw to the factory torque specifications. (Refer to Fig. 2)
For the most up-to-date installation instructions, visit the manufacturer’s website at www.ciro3d.com
FAQ (Frequently Asked Questions)
-
Q: What should I do if I encounter any issues during installation?
A: If you face any difficulties or have questions during the installation process, please refer to the manufacturer’s website for troubleshooting guides or contact their customer support for assistance. -
Q: Can I use the Chicane™ Shift Peg on any motorcycle model?
A: The Chicane™ Shift Peg is designed to be compatible with a wide range of motorcycle models. However, it is recommended to check with the manufacturer or refer to the product specifications to ensure compatibility with your specific motorcycle model.
Product Introduction
- WARNING: This indication alerts you to the fact that ignoring the contents described herein can result in potential serious injury or death if not followed.
- CAUTION: This indication alerts you to the fact that ignoring the contents described herein can or will result in material damage and/or personal injury.
- ATTENTION: This indication alerts you to the fact if you ignore this detail you will affect the performance or functionality of the product.
All Ciro products are designed for “easy assembly” and/or “plug and play”. We recommend a competent mechanic install our products, using standard mechanical procedures to assure a safe and successful installation. Read completely and understand the instructions prior to starting installation.
NOTE: Ciro products are designed and manufactured under very strict quality control. Ciro warrants that products sold to the original purchaser shall be free from any defects in materials and workmanship for a period of 3 (three) years from the date of purchase, and a limited lifetime warranty against LED failure. Ciro will have no obligation if the customer cannot show proof of purchase. Warranty will not be granted unless the part is properly installed, unmodified and maintained. Ciro will not be liable for any consequential and incidental damages, including labor, or non-Ciro products. Please visit Ciro3d.com for our complete warranty policy.
Included Items
Installation Instructions
- Park motorcycle on a level surface and ensure engine has time to cool before beginning installation.
- Remove OEM allen screw and remove shift peg. Fig. 1
- Place lock washer on provided screw and insert through large end in shift peg and attach to shift arm. Tighten to factory torque specs. Fig. 2
For the latest version of installation instructions visit www.ciro3d.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>