Schneider Electric LVS04672 Connection Plate Linergy TB Angle Bracket Instructions
- June 13, 2024
- Schneider Electric
Table of Contents
Schneider Electric LVS04672 Connection Plate Linergy TB Angle Bracket
PLEASE NOTE
Electrical equipment should be installed, operated, serviced, and maintained
only by qualified personnel. No responsibility is assumed by Schneider
Electric for any consequences arising out of the use of this material.
PrismaSeT switchboards equipped with . the Linergy busbar connection system
and Schneider Electric switchgear are subject to IEC 61439-1 & 2
certification. The instructions in this document describe how to fit Linergy
in a PrismaSeT switchboard. The installer is fully liable if it is fitted in
any other switchboard.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
- For Linergy LGYE mountings:
- Only use the screws and stud plate supplied
- Do not use the Linergy screws instead of the stud plates.
- All connections must be tightened to the correct torque (as shown). Failure to follow these instructions will result in death or serious injury.
Hardware
Mounting
Schneider Electric Industries SAS
35, rue Joseph Monier
92500 Rueil-Malmaison
France
www.se.com
04696071AG-00
As standards, specifications and designs change from time to time, please ask
for confirmation of the information given in this publication.
Publication : Schneider Electric
Schneider Electric Limited
Stafford Park 5
Telford, TF3 3BL
United Kingdom
www.se.com/uk
© 2022 Schneider Electric – All rights reserved.