Ciro 60020 Passenger Peg Adapters Installation Guide
- June 1, 2024
- Ciro
Table of Contents
Ciro 60020 Passenger Peg Adapters
Product Information
Specifications:
- Product Name: Passenger Peg Adapters for Indian Motorcycles
- Manufacturer: Ciro3D
- Compatibility: Indian Motorcycles
- Material: High-quality metal alloy
- Color: Black
Product Usage Instructions
Installation Process:
- Locate the back of the motorcycle where the passenger peg adapters will be installed.
- Position the adapters along the top side with the curve facing outward.
- Insert the pin through the top side of the adapter.
- Push the adapter downward to align the holes properly.
- Ensure that the curved side of the adapter is oriented towards the rear of the motorcycle.
FAQ:
-
Q: Are these peg adapters compatible with all Indian motorcycle models?
A: The peg adapters are designed specifically for Indian motorcycles. However, it is recommended to check the compatibility with your specific model before installation. -
Q: Can I find additional installation instructions online?
A: Yes, for the latest version of installation instructions, you can visit the official website at www.ciro3d.com.
Safety Instruction
- WARNING This indication alerts you to the fact that ignoring the contents described herein can result in potential serious injury or death if not followed.
- CAUTION This indication alerts you to the fact that ignoring the contents described herein can or will result in material damage and/or personal injury.
- ATTENTION This indication alerts you to the fact if you ignore this detail you will affect the performance or functionality of the product.
All Ciro products are designed for “easy assembly” and/or “plug and play”. We recommend a competent mechanic install our products, using standard mechanical procedures to ensure a safe and successful installation. Read completely and understand the instructions before starting installation.
NOTE:
Ciro products are designed and manufactured under very strict quality control.
Ciro warrants that products sold to the original purchaser shall be free from
any defects in materials and workmanship for 3 (three) years from the date of
purchase, and a limited lifetime warranty against LED failure. Ciro will have
no obligation if the customer cannot show proof of purchase. Warranty will not
be granted unless the part is properly installed, unmodified, and maintained.
Ciro will not be liable for any consequential and incidental damages,
including labor, or non-Ciro products. Please visit Ciro3d.com for our
complete warranty policy.
Included Parts
Installation Instructions
- Park on a level surface and shut off the motorcycle. Ensure that the engine has time to cool before installation.
- Remove the screw from the passenger peg mount arm to facilitate the installation of the adapter. Fig. 1
- Remove the spiral spring clip to release the pin. This will not be reused. Remove the pin and slide out the stock foot peg. Fig. 2
- Place spring D washer along the upper side of the mount arm with a curve facing in and a flat edge down. Fig. 3
- Push the adapter down alongside the washer until the holes align. The curved side of the adapter will face back. Reinsert the pin through the top side of the mount arm. Fig. 4
- Install the provided retainer clip onto the pin. Fig, 5
- Reattach the mount arm to the motorcycle. Fig. 6
- Attach the desired peg to the adapter using provided screw and washer. Fig. 7
- Repeat steps 2-8 on the other side of the motorcycle.
G0060020, REV.- For the latest version of installation instructions visit www.ciro3d.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>