Ciro 70005 Diamond Cut Twin Cam Engine Bolt Cover Kits Instruction Manual
- May 15, 2024
- Ciro
Table of Contents
Bolt Caps
Instruction Manual
Parts Included:
48 1/4” Caps
7 5/16” Caps
Installation Instructions:
- Park on a level surface and shut off the motorcycle. Ensure that the engine has had time to cool before installation.
- Locate bolt size and location as pictured below.
- Firmly press cap onto bolt until there is no gap. Repeat on all desired bolt locations.
*Not all cap locations are pictured
WARNING:
This indication alerts you to the fact that ignoring the contents described
herein can result in potential serious injury or death if not followed.
CAUTION:
This indication alerts you to the fact that ignoring the contents described
herein can or will result in material damage and/or personal injury.
ATTENTION:
This indication alerts you to the fact if you ignore this detail you will
affect the performance or functionality of the product.
All Ciro products are designed for “easy assembly” and/or “plug and play”. We
recommend a competent mechanic install our products, using standard mechanical
procedures to assure a safe and successful installation.
NOTE:
Ciro® warrants that products sold hereunder to the original purchaser, if
maintained and operated under normal conditions, shall be free from any
defects in materials and workmanship for a period of (3) years from date of
purchase, and a lifetime warranty against LED failure.
Ciro will have no obligation if the customer cannot show proof of purchase.
Warranty will not be granted unless the part is properly installed and
maintained.
Ciro will not be liable for any consequential and incidental damages,
including labor, or non-Ciro products.
Please visit our website Ciro3d.com for our complete
warranty policy.
G0070001, REV. B
Ciro3d.com