CORNAT SA841 CON:P Piccolo Single-Lever Mixer Tap Instruction Manual
- June 12, 2024
- CORNAT
Table of Contents
SA841
Instruction Manual
SA841 CON:P Piccolo Single-Lever Mixer Tap
Please note the following points before installation:
-
Installation should only be performed by experienced technicians under the consideration of DIN1988 and VOB.
-
Before starting the installation, please stop the water supply (ideally close the main valve at the water mter).
-
Please make sure that during assembly all seals fit properly.
(Aways check – water damage possible) -
The fitting is suitable for use in private households and only in rooms with a temperature above 0 ° C. If there are a risk of frost, the water supply should be interrupted and the valve must be completely emptied.
-
Always before the first use and when a fitting has not been used for a prolonged period, you should let rinse out a larger amount of water (water stagnation) before drinking water is taken!
-
important MOUNTING Note:
The flexible connection hoses may only be hand screwed into the fitting. Do not use under any circumstances tools like pliers or wrenches.
Operating conditions
| Hot water temperature | max. 80 ° Celsius |
|---|---|
| Test pressure | max. 16 bar |
| Operating pressure | max. 10 bar |
| Holding pressure for shower conversion | min. 0.8 bar |
(To keep noise level DIN 4109 pressure reducers have o be installed in the
main line for pressures of more than 6 bar).
Reserve technical changes.
Care instructions:
Sanitary taps require special care. Please note the following information
Chrome surfaces
are sensitive for chemicals, acid-containing cleaning supplies and all Kinds
of abrasives
Occasionally clean with soapy water, sing a softclth. Remove lime deposits
with househoid vinegar
Gilded surfaces:
are particularly sensitive to abrasives Clean as chrome surfaces. Light
polishing with a saver polishing cloth brightens.
Colored surface:
The surfaces of these taps are sealed with a special baking varnish. Do not
clean with abrasive, corrosive or leaners containing alcohol, Clean only with
cold water and a soft cloth or leather Surface damages can be expected
especial in gilded and colored fittings for inobservance of care
instructions. Warranty claims will not be asserted.
W HOT WATER
K COLD WATER
The lustrations serve as visual
depictions. Product changes are possible. Subject to change. 
One must observe that the tap is level when mounting and not tilted.
The mounting should be done by a professional personal with regards to the
DIN1988.
Dichtelement
Sealing element
Conmetall Meister GmbH – HafenstraBe 26 – 29223 Celle
– GERMANY – www.conmetalimeister.de