ErGear EGOC5 Ergonomic Office Drafting Chair Instruction Manual
- June 17, 2024
- ERGEAR
Table of Contents
ErGear EGOC5 Ergonomic Office Drafting Chair
Features
Home Office Use
WARNING! Only trained personnel may replace or repair seat height
adjustment components with energy accumulators.
-
Lumbar Support Height Adjustment:
Grip both sides of the support to adjust it up or down. -
Folding Armrest:
Lower the armrest for support or raise it up when not in use. -
Seat Height Adjustment:
To raise the seat, lift your body off the chair, then pull the lever up. To lower the seat, rest your body in the chair, then pull the lever up. -
Backrest Rocking Function:
Pull the lever out to enable the rocking function. The chair will rock back and forth with the user rather than being locked in a fixed position. Return the lever to its original position to lock. -
Backrest Tilt Tension Adjustment:
Turn the knob [ +] or [ – ] to increase or decrease the rocking tension.
Tip: Tension can be adjusted to suit a particular weight.
Increase tension for heavier weight and decrease tension for lighter weight. -
Footrest Ring Height Adjustment:
Turn the knob counter- clockwise to loosen the footrest ring, and raise or lower it to the desired position. Then turn the knob clockwise to lock it.
Missing Parts?
Supplied Parts and Hardware
Step 1
-
Leg Connector with Decorative Cover
-
Leg
-
M6x14mm Bolt
-
Allen Key
Step2
- Caster
Step 3
-
Gas Lift Cylinder
-
Footrest Ring
Step 4
-
Backrest
-
Left Armrest
-
Right Armrest
-
M6x20mm Bolt
-
Allen Key
Step 5
-
Seat
-
M6 Washer
-
M6x35mm Bolt
-
Allen Key
Step 6
-
Lift Mechanism
-
M6 Washer
-
M6x20mm Bolt
-
Allen Key
Assembling the Chair Legs
Step 1
Remove decorative cover and keep for Step 3.
Slide the legs [ 02] onto the leg connector [ Ola], then secure with bolts
[A].
Attaching the Casters
Step2
Press the casters [ 03] firmly into the holes on the legs [ 02].
Assembling the Chair Base
Step3
Flip over the assembled base. Attach the decorative cover [ Olb], then press
the gas lift cylinder [ 04] into the leg connector. Remove the decorative
cover [ 04a].
Press the footrest ring [05] onto the gas lift cylinder [04].
Assembling the Armrests and Backrest
Step4
Align the holes on the armrests [07] and [08] with the holes on the backrest
[06], then secure with bolts [B] .
Attaching the Seat
Step 5
Attach the seat [09] to the armrests with washers [c] and bolts [D].
Attaching the Lift Mechanism
Step 6
Attach the lift mechanism (10) to the seat (09) with washers (C) and bolts (E)
Attaching the Chair to the Base
Step7
Align the hole underneath the chair with the gas lift cylinder [ 04 ]. Press
the seat down to secure the chair to the base.
HEAVY! You may need assistance with this step.
IMPORTANT SAFETY INFORMATION
Compare package contents to the supplied parts and hardware list to confirm
that all parts were received and undamaged. Do not use damaged or defective
parts. If you require replacement parts, please email customer service.
Carefully read all instructions before attempting installation. If you have
any questions or concerns, please email customer service.
-
Only (1) person should sit in the chair at a time.
-
Only use the chair on level flooring.
-
Sit correctly in the chair with weight centered over the base.
-
Do not sit on the edge of the chair.
-
Do not stand on the chair or use it as a ladder or stair.
-
Sitting on the armrest can lead to damage and injury.
-
To avoid tipping over, do not lift legs up while tilting the backrest.
-
Children under 5 years of age should not operate the chair alone.
-
Do not put heavy objects on the chair, or use it as a trolley.
-
Keep hands away from the seat lift mechanism during operation.
-
Keep the chair away from flame and heat sources.
-
Do not use items with sharp edges or hooks near the chair.
Care and Maintenance
How to Clean
- It is recommended that the office chair be thoroughly cleaned at least once a month to maintain condition and functionality.
- Use a vacuum cleaner to suck up the dirt that may be resting on the seat.
- The casters will stick if not maintained regularly. Brush the casters with water and wipe clean with a damp cloth.
- If dirt solidifies on the surface of the casters, use soap and water to clean it off.
- Use a dry cloth to finish cleaning, or leave your office chair in a ventilated area to air dry.
Maintenance Tips
- Direct sunlight can ruin an office chair over time, degrading most fabrics and materials. Keep your office chair out of direct sunlight.
- Humid conditions may lead to the formation of mildew on fabric and/or rust on metal parts. Do not keep your office chair in a damp environment.
- Be careful with drinks, food, or any type of liquids when you are near your chair. If a spill happens, clean and attend to stains immediately.
- Avoid the use of sharp objects or blades near the office chair that may cause damage.
- If possible, cover the chair to protect it from dirt and dust.
- Regularly examine the chair to ensure that all nuts and bolts are correctly fastened, including those connecting the seat, back, and chair mechanics.
- Retightens bolts every 6 months by using the included Allen key.
*Using an electric drill can damage the chair. Only use hand tools.
CUSTOMER SUPPORT
Assembly Video: Video de montaje:
https://www.youtube.com/@ergear
Thank you for choosing this ErGear pro, duct. At ErGear we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us.
Gracias por elegir este producto ErGear. En ErGear intentamos proporcionarle los productos y servicios de la mejor calidad de la industria. En caso de que tenga algun problema, no duce en ponerse en contacto con nosotros.
Con,plete Flexibility. Total Freedom Flexibilidad Corn leta. Libertad Total
1-800-651-9525 (us/CA) Mon-Fri, Sam-Bpm
( CST)
44-808-196-3875 (UK)
Mon-Frt 2pm-10pm (UTC)
support@ergear.com
https://ergear.com
860-01856- 00 Rev02