Ciro 95001 Easy Stash Document Holder Instruction Manual
- June 1, 2024
- Ciro
Table of Contents
Ciro 95001 Easy Stash Document Holder
Important Information
WARNING This indication alerts you to the fact that ignoring the contents described herein can result in potential serious injury or death if not followed.
CAUTION This indication alerts you to the fact that ignoring the contents described herein can or will result in material damage and/or personal injury.
ATTENTION This indication alerts you to the fact if you ignore this detail you will affect the performance or functionality of the product.
All Ciro products are designed for “easy assembly” and/or “plug and play”. We recommend a competent mechanic install our products, using standard mechanical procedures to assure a safe and successful installation. Read completely and understand the instructions prior to starting installation.
NOTE : Ciro products are designed and manufactured under very strict quality control. Ciro warrants that products sold to the original purchaser shall be free from any defects in materials and workmanship for a period of 3 (three) years from the date of purchase, and a limited lifetime warranty against LED failure. Ciro will have no obligation if the customer cannot show proof of purchase. Warranty will not be granted unless the part is properly installed, unmodified and maintained. Ciro will not be liable for any consequential and incidental damages, including labor, or non-Ciro products. Please visit Ciro3d.com for our complete warranty policy.
Installation Instructions
- Thoroughly clean surface of any dirt, dust or grease.
- Check placement of Easy Stash Holder.
- Peel off the red adhesive liner.
- Place the holder on the surface and apply moderate pressure for about 30 seconds.
Customer Support
G0095001, REV._ For the latest version of installation instructions visit www.ciro3d.com
