CIRO 3D 59903 Drink Holder Reducer User Manual
- June 1, 2024
- CIRO 3D
Table of Contents
CIRO 3D 59903 Drink Holder Reducer
Product Information
- Product Name: Drink Holder Reducer
- Included Items: Ring with T tabs
- Model Number: G0059903
- Manufacturer: Ciro3D
Product Usage Instructions
- Place the ring into the drink holder, aligning the arrow on the ring with the mount on the drink holder.
- Loop the T tabs through the top hole of the drink holder.
- Loop the T tabs back in through the lower hole of the drink holder.
Specifications
- Material: Plastic
- Color: Black
- Dimensions: Standard drink holder size
FAQs
Q: Can the drink holder reducer accommodate different sizes of drink holders? A: The drink holder reducer is designed to fit standard drink holder sizes. It may not be suitable for significantly larger or smaller drink holders.
Q: Is the product dishwasher safe? A: It is recommended to hand wash the drink holder reducer to ensure longevity and prevent damage.
-
WARNING
This indication alerts you to the fact that ignoring the contents described herein can result in potential serious injury or death if not followed. -
CAUTION
This indication alerts you to the fact that ignoring the contents described herein can or will result in material damage and/or personal injury. -
ATTENTION
This indication alerts you to the fact if you ignore this detail you will affect the performance or functionality of the product
All Ciro products are designed for “easy assembly” and/or “plug and play”. We recommend a competent mechanic install our products, using standard mechanical procedures to assure a safe and successful installation. Read completely and understand the instructions prior to starting installation.
NOTE: Ciro products are designed and manufactured under very strict quality control. Ciro warrants that products sold to the original purchaser shall be free from any defects in materials and workmanship for a period of 3 (three) years from the date of purchase, and a limited lifetime warranty against LED failure. Ciro will have no obligation if the customer cannot show proof of purchase. Warranty will not be granted unless the part is properly installed, unmodified and maintained. Ciro will not be liable for any consequential and incidental damages, including labor, or non-Ciro products. Please visit Ciro3d.com for our complete warranty policy.
Included Items
INSTRUCTIONS
- Place ring into drink holder aligning the arrow (shown) with the mount.
- Loop the “T” tabs through the top hole.
- Loop the “T” tabs back in through the lower hole.
G0059903, REV._ For the latest version of installation instructions visit www.ciro3d.com
