Trudian TD-M1-B Sliding Door Lock User Manual

Trudian TD-M1-B Sliding Door Lock

Product Information

Specifications

• Product Name: Smart Lock TD-M1-B
• Material: Aluminum
• Supported Mortise: 2585/2885/3085/3585/4085/4585/5085/6085, 2885/3585 multi-point, 2085/2885/3585 double-hook
• Fingerprint Sensor Type: Semiconductor fingerprint sensor
• Fingerprint Capacity: 100
• Password Capacity: 100
• IC Card Capacity: 50 MIFARE M1 card
• Unlock Methods: Fingerprint, PIN Code, Dynamic Password, Tuya APP, IC Card, Mechanical Key
• Supported Phone Systems: Android 5.0 or IOS7.0 and above
• Bluetooth Standard: Bluetooth 4.2 BLE
• Operating Temperature Range: -20°C to 60°C
• Relative Humidity: 40% to 90% (no gel cream)
• Storage Environment: -40°C to 85°C

Product Usage Instructions

Operation

How to place a finger
Position your finger on the fingerprint sensor using moderate pressure and ensure it lies as flat as possible. The central part of the fingerprint holds the majority of the pertinent information.

Usage Instructions

1. Press and hold the reset button on the back of the lock for 5
   seconds.

2. Wait until the system displays “Initialization Succeeded”.

3. You can also delete the corresponding lock on the Tuya APP to
   initialize the system (needs to be in the connection state).

App download| You can download the Tuya Smart App on Google Play and App
Store.
App registration and login| If you do not have an App account, you can choose to register
or log in via SMS verification code. Click “Create a new account”
to enter the account registration page. Obtain the SMS verification
code and set the password as prompted. If you already have an
account, you can click “Log in with an existing account”.

FAQs (Frequently Asked Questions)

• Q: How do I change the batteries?
  A: To change the batteries, locate the battery compartment usually on the inner side of the lock, and replace the old batteries with new ones following the polarity markings.

• Q: Can I program multiple fingerprints for access?
  A: Yes, you can program multiple fingerprints for access. Refer to the user manual for instructions on adding and managing fingerprints.

Smart Lock Introduction

• Product overview: exquisite appearance, reasonable structure, safe and reliable smart fingerprint lock.
• Scope of application: broken bridge door, sliding door, translation door, plastic steel door, indoor door, KFC door, etc.
• Lock mortise specifications: 2885,3085,3585…, 3585 multi-point and 288 5/3585 double hook, etc.
• Product features: Adopts international advanced biotechnology to ensure reliable quality; Uses 4 * AAA batteries; The handles are designed to protect against violent destruction; 5 options to open the door: fingerprint/password/IC card/mobile phone APP/ mechanical key.
• Double-lock function: both the inside and outside handles can be locked, and all the deadbolts can be locked at the same time.

Dimensions

Dimensions(mm)

Technical Specifications

Unlock Methods| Fingerprint, PIN Code, Dynamic Password, Tuya APP, IC Card, Mechanical Key
---|---
Sliding Door| Support
Material| Aluminum
Lock Dimension| 28.6×315.6×22.8mm
Supported Mortise| 2585/2885/3085/3585/4085/4585/5085/6085, 2885/3585 multi- point, 2085/2885/3585 double-hook
Fingerprint Sensor Type| Semiconductor fingerprint sensor
Fingerprint Capacity| 100
Password Capacity| 100
IC Card Capacity| 50
Supported IC Card Type| MIFARE M1 card
False Recognition Rate| < 0.001%
False Rejection Rate| < 1.0%
Supported Phone Systems| Android 5.0 or IOS7.0 and above
Tuya APP Connection| Bluetooth
Bluetooth Standard| Bluetooth 4.2 BLE
---|---
Connection Mode| Long connection (keep Bluetooth online)
Bluetooth Gateway| Support
Door Opening Record| Support
Alarm| All kinds of door lock alarms, support background push
Battery| 4pcs 1.5V AAA alkaline dry batteries
Low Alarm Voltage| 4.6V
Voltage Range| 4.5V ~ 9V
Standby Current| 50μA
Working Current| ≤ 200mA
Unlocking Time| ≤ 1.5s
Operating Temperature Range| -20 ~ 60℃
Relative Humidity| 40% ~ 90% (no gel cream)
Storage Environment| -40 ~ 85℃
ESD(Contact Discharge)| 8KV (with lock case)
ESD(Air Discharge)| 15KV (with lock case)
Motor Drive| The output voltage is the supply voltage, and the current is ≤ 0.6A
Keypad Type| Capacitive touch keypad

Operation

How to place the finger
Position your finger on the fingerprint sensor using moderate pressure and ensure it lies as flat as possible. The central part of the fingerprint holds the majority of the pertinent information. Below are figures demonstrating the correct and incorrect ways for finger placement:

Usage Instructions

Features

|

Instructions

---|---
1. Restore factory setting| 1.  Press and hold the reset button on the back lock for 5 seconds

2.  Wait until the system displays “Initialization Succeeded”

3.  You can also delete the corresponding lock on the Tuya APP to initialize the system (needs to be in the connection state)

2. App download| You can download the Tuya Smart App on Google Play and App Store.
3. App registration and login| App Registration: If you do not have an App account, you can choose to register or log in via SMS verification code. Click “Create a new account” to enter the account registration page. Obtain the SMS verification code and set the password as prompted. If you already have an account, you can click “Log in with an existing account” to log in to the App. Login methods support passwords, verification codes, and social media account login.
4. Add locks to the App| Click the “+” icon in the upper right corner of the app home page.

Manual addition method:

1.  click on the left “security sensing” category

2.  find the door lock (Bluetooth)

3.  press the * key in the lower left corner of the key plate to start the Bluetooth distribution network

| 4. wait for the device to be connected

Automatic search method:

1. select the Search device page

2. press the * key in the lower left corner of the key plate and the door lock device will be automatically searched in the APP.

3. click the link and wait for the device to be connected

---|---
1. Bluetooth unlock| Long press the unlock icon in the App to unlock automatically
2. Unlock with fingerprints| Click Settings in the App, fingerprint management, add fingerprints according to the prompts, and then you can use the entered fingerprint to unlock
7. Unlock with passwords| Click Settings in the App, password management, follow the prompts to add the password, and then you can use the entered password to unlock
8. Unlock with IC cards| Click Settings in the APP, key card management, add IC card according to the prompts, and then you can use the added IC card to unlock
9. Presentation mode| Any IC card can be used to unlock when Bluetooth is not bound; The initial password is 123456
10. Normally open mode| The normal mode can be opened after the “automatic lock” is turned off

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>