NINGBO 25238 Watch Charger With Multi Cables Instruction Manual
- July 10, 2024
- Ningbo
Table of Contents
NINGBO 25238 Watch Charger With Multi Cables Instruction Manual
WirelessChargingPad
TechSpecifications
Input: 5V/2A
Output: 5V/2A
PowerDelivery: 1-2.5W
Instructions
Chargingwatchdevices
- Check your watch supporting with wireless charging it will be listed in manufacturer’s specifications
- Simply place the enabled device atop the wireless charging pad. Your device should show the charging indication
- When completely charged, remove the device from the charging pad.
Safety Precautions
RF Exposure Warning Statements: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment.
This equipment shall be installed and operated with minimum distance 20cm
between the radiator & body.
WARNING When using this product, basic precautions should always be followed:
- Read all the instructions before using the product. no do
- To reduce the risk of injury, close supervision is necessary when the product is used near children, res
- Do not expose the devide to moisture.
- Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury.
- Do not use the devide if damaged or modified.
- Damaged or modified batteries may exhibit unpredictable behavior resulting in fire explosion or risk of injury.
- Do not disassemble the device. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result a risk of fire or injury
- Do not expose the device to fire or excessive temperature.Exposure to fire or temperatures above 212F” may casue explosion.
- Have servicing performed by a qualified repair person using only identical replacement parts.
- This will ensure that the safety of the product is maintained.
- Do not overcharge watch. Unit may get hot with excessive use. Remove watch when it is fully charged. Never charge for more than 7 hours at a time.
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment. does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
* Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, induding interference that may cause undesired operation.
MADEINCHINA
FCCID: 2AJZYCL2325
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>