KSIX URBAN 4 MINI Smart Watch User Manual

KSIX URBAN 4 MINI Smart Watch

Specifications

• Model: Urban 4 mini smartwatch (BXSW19A, BXSW19B, BXSW19R, BXSW19N)
• Charging Time: Approximately 4 hours for full charge
• Battery Life: Up to 3 days depending on usage
• IP Rating: IP68 (freshwater resistant)

Product Usage Instructions

Attaching and Removing Straps

To remove a strap: Hold the strap, press the button on the back of the watch on the corresponding strap piece, and slide it to the left.

To insert a strap: Hold the strap and then slide it to the right until the strap is fully inserted into the watch body. Make sure the small metal pieces on both ends are inserted into the watch body rail.

Charging

Connect the included 60 cm USB-A cable with a magnetic charging base to the smartwatch. Connect the USB-A connector to a charger, computer output, or power bank. Place the magnetic base on the back of the watch for charging. A full charge takes approximately 4 hours.

Power On/Off

To turn on the smartwatch, press the dial button for 3 seconds. To turn it off, long tap the inferior button. Choose between Power Off and Reboot options that appear and slide to the right. Alternatively, access the main menu and tap on the Power on/off button to shut down.

IP Protection Rating

The smartwatch has an IP68 rating, making it resistant to fresh water submersion up to 1.5 meters for 30 minutes. Avoid using salt water and rinse with fresh water after exposure to saltwater.

Characteristics

Technical specifications

• Display: 1.74” TFT multi-touch 320 x 390
• Battery: Li-ion 200 mAh
• Voltage frequency: 100-120V / 50-60 Hz
• Compatibility: Android 4.4 / iOS 8.0 and later versions
• App: MActivePro
• Housing material: Zinc alloy
• Display material: BOE Glass
• Strap material: Silicone, stainless steel, and copper buckle
• Protection rating: IP68 (submersible 1.5 meters for 30 minutes in fresh water. Not recommended for use in salt water)
• Watch dimensions: 41.4 x 34.7 x 10.8 mm
• Strap width: 22 mm
• Wrist closure diameter: 12.5 to 17.5 cm
• Weight: 35.7 g
• Autonomy: Up to 3 days in normal use, Up to 2 days in intensive use
• Charging time: 4 hours

Built-in microphone and speaker

Health functions: Sports monitor, activity tracker, heart rate meter, blood pressure meter, blood oxygen saturation meter, electrocardiogram, sleep monitor, menstrual cycle, thermometer, health reminders

Functions: Make and receive calls, notifications, voice assistants, music control, games, remote camera control, anti-lost function, auto-drain, flashlight, recorder, etc. Other functions: Alarm, calculator, stopwatch, timer, weather, breathing exercises, etc.

Languages: English, Spanish, French, German, Italian, Portuguese, Russian, Japanese, Korean, Ukrainian, Dutch, Arabic, Czech, Greek, Thai, Polish, Indonesian, Turkish, Hebrew, Vietnamese, etc.

In the box

• 1 x Smartwatch
• 1 x USB-A cable with wireless charging base (60 cm) 1 x Manual

Diagram

1. Screen
2. Speaker
3. Strap button
4. Dial button
5. Microphone
6. Magnetic charging port
7. Inferior button

How to attach and remove the straps

Although only one strap is included in the box, the straps of the Urban 4 mini are interchangeable. The shorter strap must be placed in the display’s top slot, while the longer strap must be placed in the display’s bottom slot. Otherwise, the insertion system may be irreparably damaged.

• To remove a strap: Hold the strap, press the button on the back of the watch on the corresponding strap piece, and slide it to the left.
• To insert a strap: Hold the strap and then slide it to the right until the strap is fully inserted into the watch body.

The straps have small metal pieces on both ends that must be inserted into the watch body rail.

Charging

The Urban 4 mini smartwatch’s full charge time is approximately 4 hours, and the battery can last up to 3 days depending on the usage.
Use the 60 cm USB-A cable with a magnetic charging base that is included in the box to charge the smartwatch. Connect the USB-A connector to a charger, computer output or powerbank and place the magnetic base in a way so that it properly sticks to the back part of the body watch.

Power on/off

To turn on the smartwatch press the dial for 3 seconds.
To turn off the smartwatch, long tap the inferior button. 2 options will appear: “Power Off” and “Reboot”. Select the desired option and slide to the right. You can also shut down the watch by accessing the main menu and tapping on the “Power on/off” button.

About IP protection rating

The Urban 4 mini smartwatch has an IP68 protection rating in freshwater (not recommended for use in salt water). This means that it can withstand submersion below 1.5 meters for up to 30 minutes in freshwater such as lakes, rivers, or natural pools.
Note: In case of swimming in the sea or in a saltwater pool, it is recommended to rinse the watch with fresh water after immersion due to the corrosive effect of salt water.

Initial setup

Download the app

The Urban 4 mini smartwatch-compatible app is called MActivePro. There are several ways to download it:

• Tap here to download the MActivePro app from Google Play or the App Store.
• You can also download the app directly by typing “MActivePro” in the Google Play or App Store search engine.
• Another way to download the app is with a QR code. To access this QR code swipe the main screen to the right and tap on the QR code icon.

Register in the app

1. When you access the app tap on the sign up now option.
2. Once inside, type in your email set the password that you will want to use, and tap on submit.
3. When you have done so, set your avatar. Choose your nickname, your height, weight, and date of birth to get more specific health and sports data.

Once you follow these steps, you are ready to go. Make sure to accept all the permissions that the app requests to ensure optimal performance and function usage.

Pairing iOS / Android devices

1. Enable your smartphone’s Bluetooth.
2. Log in to the MActivePro app and access the device section (third icon on the bottom of the screen). You will see this:
3. Tap on add device. A list of available devices will appear. Tap on URBAN 4 MINI.
4. Once you tap on URBAN 4 MINI the device will be paired.
5. After you have paired it with the app. A smartphone notification should also pop up. Accept the pairing.
6. As previously mentioned, make sure to accept all the permissions that the app requests. Also, make sure that it correctly binds through. If it does not, access your phone settings and select URBAN 4 MINI.

Troubleshooting

• If the app cannot find the device power off the smartwatch and then on again.
• If the device connects and disconnects quickly there may be an obstruction between the device and the phone. Wearing metal jewelry may interfere with the stability of the connection.
• If some functions, such as call management, do not work properly, make sure to check in your smartphone’s settings if the smartwatch is properly paired. If it is not, unpair the smartwatch from inside the MActivePro app and repeat the pairing process.
• If the device does not charge, it may be due to a dirty or rusted charging port.

Usage and functions

As previously stated, it is very important to always accept all the permissions requested by the app so that the smartwatch functions optimally. For the smartwatch functions to work, make sure that you enable them via app.
To do so, tap on any feature and enable it. Phone requests will pop up, make sure to accept them.

How to browse through the smartwatch
The usage method of the Urban 4 mini smartwatch is very simple and intuitive:

• Via screen swipe
  • Swipe your finger to the left to enter the quick-access menu. Here, some health and sport functions are displayed by default. You can manually add some other functions to the quick access. To do so, just keep swiping right until a “+” icon appears. Tap on it and select the feature that you desire to display in the quick-access menu.
  • Swipe your finger to the right to access the auxiliary menu. Here, the weather information and the date will be displayed, as well as the latest smartwatch functions that you have accessed.
  • Swipe your finger upwards to access the floating functions menu. In here, you will be able to access the main functions of the smartwatch.
  • Swipe your finger downwards to view app notifications, missed calls, text messages, and other notifications.
• Via dial: Press the dial to access the main menu. From here, you will be able to access all the smartwatch’s features by tapping on the corresponding icon. Also, by spinning it upwards from the main screen, you will access the floating functions menu and will be able to navigate through it.
• Via inferior button: Press the button that’s right below the dial to access the smartwatch’s settings menu.

Changing the watch face

There are two ways to change the Urban 4 mini’s watch face:

• The first option is to long-tap the main screen. When you do so, swipe right or left to choose between the options.
• The second option is from within the app. From the app device section tap on dial markers to download the watch faces that you desire. There are hundreds to choose from. When you download one watch face it will be automatically set as the main screen theme of the smartwatch. It will also be added to the list of watch faces stored inside the smartwatch. You will also be able to design your own dials, even with your own pictures or videos.

Calls

The Urban 4 mini smartwatch allows you to make, receive, answer, and reject calls. You can maintain a phone call conversation with just the smartwatch thanks to its built-in microphone and speaker.

• Receiving, answering, and rejecting calls
  It is very important to have the call notifications feature enabled to receive calls. Calls will appear in real-time on the screen and the watch will sound/vibrate.
  Calls can be accepted by pressing the green icon and rejected by pressing the red icon. The Urban 4 mini smartwatch features a built-in microphone and speaker so that you will be able to attend incoming calls without the need for your smartphone.
  If the call is accepted, it can be ended by pressing the red icon. To reject the call, tap on the red icon before answering it. A lost call notification will appear on the smartwatch’s display. In case the incoming call function is not activated, the smartwatch will only display incoming call notifications, but will not emit real-time signals or vibrate.

• Making calls
  There are three options when it comes to making calls:

• Call a contact: The Urban 4 mini smartwatch allows you to call contacts stored in your smartphone. To synchronize contacts with the smartwatch, access the frequent contact option in the app device section. Add the contacts that you desire, and you will be able to call them by just using your smartwatch. To do so, access the grey contact icon. All the contacts that you have previously selected via the app will be shown here. Tap on the desired contact and tap on the phone icon to make the call. You will also be able to access this feature through the Green Phone icon.

• Dialpad: From within the same smartwatch feature, the green phone icon, one of the options that will show is the Dialpad. Tap on it to access it. Once inside, you will be able to dial a phone number. To make the call tap on the phone icon.

• Call records: From within the same smartwatch feature, the green phone icon, one of the options that will show is the Call Record. Tap on it to access it and view all the made, received, and lost calls. Tap on the phone number/contact and then on the phone icon to make the call.

Notifications

The smartwatch displays your notifications. This includes apps such as WhatsApp, Gmail, Instagram, Twitter, and LinkedIn, among many others.
To access the notifications received, swipe the main screen downward.

Voice assistants

The Urban 4 mini smartwatch is compatible with voice assistants. To correctly configure the voice assistants, you must have successfully synchronized the smartwatch to your smartphone via the MActivePro app and enabled all accesses.
To access this function, press the dial for 2 seconds. Then, tap on the voice assistant icon and make your request.
You can also access this function from the main menu. To do so, tap on the blue/purple Voice Assistant icon.

Music Control

The smartwatch features a music control tool. Access the smartwatch main menu and tap on the musical note icon. This function works with music apps, such as Spotify or Apple Music. Once inside, tap on the play/pause icon to start playing music or to pause it. You will also be able to play the previous or the next song. This function will also let you turn the volume up or down.
When your phone is paired with the Urban 4 mini, all the audio files will play on the smartwatch.
This includes YouTube videos, WhatsApp voice notes, WhatsApp videos, etc. To avoid this, access your phone’s settings, and enter the Urban 4 mini device option.
Unselect the media audio setting so that all the music, videos, voice notes, and other files that contain audio play on the phone and not on the smartwatch.
You will also be able to access the music control feature from the quick access menu.

Remote camera control

The Urban 4 mini smartwatch allows you to take pictures from your smartphone remotely. Access the smartwatch main menu and tap on the camera icon. If your smartphone is unlocked and correctly paired to the smartwatch, your smartphone will automatically display a camera. To take remote pictures, simply place your smartphone wherever you want and tap on the camera icon inside the remote camera function of your smartwatch.

Games

The smartwatch allows you to download and play games with just your smartwatch. There are also somatosensory games, which are motion games that will be displayed on your smartphone, but you will interact with your smartwatch through movement.
To download smartwatch games, access the Apps Market option in the MActivePro app and download the game that you want to play. After it downloads it will appear on your smartwatch.
To download somatosensory games, access this option in the MActivePro and download the game that you want to play. The game will be displayed on your smartphone, but you will interact with it through wrist movements.

Anti-lost function

The Urban 4 mini smartwatch features an anti-lost function. Access the smartwatch’s main menu and tap on the green icon showing a laptop and a phone. Once inside, tap on the icon again to make your paired phone emit a ringtone so that you can find it.
The app will let you do the same but the other way around. Access the device section of the app and tap on the find watch option. Once you do so, the Urban 4 mini will start emitting a ringtone so that you can find it.

Other functions

The Urban 4 mini features a wide variety of other functions, such as an alarm, calculator, stopwatch, timer, weather, breathing exercises, and sedentary reminders, among others.

Health

Sports
The Urban 4 mini allows you to monitor a wide variety of sports. Access the smartwatch main menu and tap on the green icon showing a runner. Once inside, you will see a wide variety of sports, such as: running, cycling, basketball, football, hiking, free training, among others.
Tap on the desired sport to start the monitorization. Once you do so, real- time sports data will show, such as heart rate, steps taken, calories burned, and time spent. This data might vary depending on the sport performed. You can also access this feature via the quick-access menu.
You will also be able to start monitoring your sports from within the MActivePro app, in the sports section.

Activity tracker
The smartwatch automatically registers the steps taken, the burned calories and the distance traveled. To view this information, access the smartwatch main menu and tap on the icon with blue, green and pink circles.
You can access this feature via the quick-access menu. This data will also appear in the MActivePro sports section.

Heart rate meter
The Urban 4 mini smartwatch monitors your heart rate automatically. Enable this function from within the MActivePro app.
You will also be able to measure your heart rate immediately. To make use of this tool, access the smartwatch main menu and tap on the red heart icon. After a few seconds, the number of heart beats per minute will be displayed. You can also access this feature via the quick access menu and by tapping on the smartwatch inferior button.
This data will be displayed in the MActivePro device section.

Blood pressure meter
The smartwatch allows you to measure your blood pressure instantly. To do so, access the smartwatch main menu and tap on the thermometer icon.
Once inside, stand still. After a few seconds, your blood pressure data will be displayed.
It will also be displayed in the MActivePro home section.

Blood oxygen saturation meter
The Urban 4 mini smartwatch allows you to measure your blood oxygen saturation levels instantly. To make use of this tool, access the smartwatch main menu and tap on the white icon showing blue and red semicircles.
Once inside, stand still and, after a few seconds, the blood oxygen saturation values will be displayed.
This data will be displayed in the MActivePro home section.

Sleep monitor
The smartwatch functions while you sleep and provides statistics on the time and quality of your sleep. This tool’s available information is more detailed in the MActivePro app than in the smartwatch:

• In the smartwatch: To consult the time you have slept, access the main menu and tap on the blue icon showing a bed. Once inside, your sleep time will be displayed.
• In the app: Your sleep data will also be displayed in the app home section. Access it to see the time that you have slept, as well as the time that you have been in deep sleep, light sleep, and awake. You will also be able to view a weekly and monthly sleeping record with all your sleep data.

You can attach this function to the quick access menu by tapping on the “+” icon.

Menstrual cycle
The MActivePro app allows you to set reminders related to your menstrual cycle. Enter the MActivePro profile section and tap on the female health option.
Once inside, you will be able to set some data related to your menstrual period, such as cycle length, menstrual length, and reminders, among others. When you set all this info, a calendar with certain menstrual cycle data will be displayed in this app option.
If you set reminders, they will show in the Urban 4 mini smartwatch. To view these reminders, access the main menu and tap on the white icon showing purple and red circles.

Thermometer
The smartwatch allows you to take your temperature instantly. To do so, tap on the °C icon inside the smartwatch’s main menu. Once inside, wait a few seconds and your body temperature will be displayed.

Health reminders
You can set health reminders through the MActivePro app. Once set, the smartwatch will display them. To do so, access the device section and tap on the health reminder option. Inside, you will see 3 kinds of health reminders:

• Drinking water reminder: You will be able to choose the frequency at which you want the reminder to be displayed in the smartwatch. You will also be able to set the time range in which you want the reminder to be displayed (for example, from 8:00 to 20:00).
• Sedentary reminder: It works in the same way as the drinking water reminder.
• Medication reminder: You will be able to choose the number of reminders per day that you desire (maximum of 3). You will also be able to choose the time of each of the 3 medication reminders and which days you want them to be displayed on the smartwatch.

Exemption clause

1. The Urban 4 mini smartwatch heart rate and blood pressure data should not be used as the basis for any medical or diagnostic decision.
2. Only qualified medical personnel can diagnose and treat cardiovascular disease and high blood pressure problems. Contact your medical center for a medical opinion, and do not treat or diagnose yourself.
3. The Urban 4 mini smartwatch heart rate and blood pressure data may not be accurate due to factors such as signal interference, improper placement of the device, or weather or physiological changes.
4. Do not use the Urban 4 mini smartwatch data to modify your medication or medical treatment. Follow the instructions provided by authorized medical personnel.
5. We take no responsibility for the inaccuracy of the above, nor do we assume any liability for the consequences of the use of such information.

FAQ

Q: How can I download the MActivePro app?

A: You can download the MActivePro app from Google Play or App Store by searching for “MActivePro”. Alternatively, swipe the main screen to the right on your smartwatch and tap on the QR code icon to access a QR code for app download.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>