radioshack 2604735 Ergonomic Wireless Bluetooth Mouse User Manual
- July 10, 2024
- RadioShack
Table of Contents
radioshack 2604735 Ergonomic Wireless Bluetooth Mouse
Specifications
- Wireless data transmission: 1Mbps
- Engine: Optical
- Operating voltage: 3.7V
- Product size : L124 x W91 x H73 mm
- Channel: 16 channels
- Distance: 10m
- Key life : 5 million clicks
- Product weight: 149g
- Working current: 6mA
- Resolution: 800-1200-1600 DPI
- Maximum acceleration: 10G
- Sleep current: 0.2mA
- Response rate: 250Hz
Thank you for purchasing RadioShack’s ergonomic wireless Bluetooth mouse. Here we explain how to link the receiver, install the mouse and use the product
PACKAGE CONTENTS
SYSTEM REQUIREMENTS
- IBM or compatible computers Windows: 2000/ ME / XP(x64) / 7 / 8 /10 Mac OS x (over V10.4)
- One available USB port
TECHNICAL PARAMETERS
Basic parameters
- Wireless data transmission: 1Mbps
- Engine: optical
- Operating voltage: 3.7V
- Product size : L124 x W91 x H73 (millimeters)
- Channel: 16 channels
- Distance: 10m
- Key life : 5 million
- Product weight: 149g
Laddering working current:
- Working current: 6mA
Sleep current: 0.2mA
Tracking performance:
- Resolution: 800-1200-1600
- Maximum acceleration: 10G
- Response rate: 250Hz
PRODUCT FUNCTION DIAGRAM
CORRESPONDING KEY FUNCTIONS SHOWS IN IMAGE
- DPI key
- Non-slip scroll wheel
- Left/right button
- Thumb grip design
- Forward/backward key
- Charging interface
- Optical sensor system
- Bluetooth pairing
- Power on/off switch
- 2.4GHz and Bluetooth toggle switch
- Nano receiver slot
- Anti-slip tape
PRODUCT USAGE
2.4 GHz mode (see fig1):
- Step 1 : Take out the receiver from the bottom of the mouse.
- Step 2: Insert the receiver into the computer’s USB port.
- Step 3 : Slide up switch “10” to select 2.4GHz.
- Step 4: Slide up switch “9” to power on. When the mouse cursor appears on the computer screen, you can use the mouse normally.
Bluetooth mode (see fig1):
- Step 1 : Slide down switch “10” to select Bluetooth.
- Step 2 : Slide up switch “9” to power on.
- Step 3: Press the Bluetooth button (8) for 2-3 seconds, then you can pair the mouse with your device by selecting Bluetooth Mouse When the mouse cursor appears, you can use the mouse freel
ATTENTION
- To prolong battery life, please use the mouse on the white or light color desk.
- Please turn the power switch off, if you don’t use the mouse for a long time to prevent battery leakage and product damage
FREQUENTLY ASKED QUESTIONS
If doesn’t work, what can we do?
- Make sure the battery is fully charged.
- Check if the USB receiver is settled firmly.
- When the mouse is in sleep mode, you can wake it up by turning it off and on with switch “9” (fig1).
When the mouse moves slowly or malfunction, what can we do?
- Increase the distance between the mouse and other computers or equipment.
- Turn off other wireless devices.
- If on a metal surface, like copper, iron, or aluminum, it may have effects on the transmission, and extend the mouse’s response time.
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
RF exposure
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
ATTENTION
- To prolong battery life, please use the mouse on the white or light color desk.
- Please turn the power switch off, if you don’t use the mouse for a long time to prevent battery leakage and product damage.
FREQUENTLY ASKED QUESTIONS
- If doesn’t work, what can we do?
- Make sure the battery is fully charged.
- Check if the USB receiver is settled firmly.
- When the mouse is in sleep mode, you can wake it up by turning it off and on with switch “9” (fig1).
- When the mouse moves slowly or malfunction, what can we do?
- Increase the distance between the mouse and other computers or equipment.
- Turn off other wireless devices.
- If on a metal surface, like copper, iron, or aluminum, it may have effects on the transmission, and extend the mouse’s response time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>