radioshack 2607135 Ergonomic Mouse Instruction Manual
- June 1, 2024
- RadioShack
Table of Contents
radioshack 2607135 Ergonomic Mouse
Specifications:
- Model: 2607135
- Dongle FCC ID : 2BEQQ-2607135D,
- Mouse FCC ID: 2BEQQ-2607135M
- Features: 2.4 GHz wireless technology
- DPI: 800-1200-1600
- Compatible with Windows XP SP3/Vista7/8/10, Mac OS X 9.x or later
- Dongle (Receiver) Input: DC 5V
- Mouse Input: DC 3V
Product Usage Instructions
Inserting the Battery:
- Remove the battery compartment cover of the mouse.
- Insert 2 x 1.5 V AAA batteries, following the polarity diagram inside the compartment.
- Replace the battery compartment cover securely.
Safety Instructions:
- Read the instruction manual before using the device.
- Follow all safety instructions to prevent damage from improper use.
- Use the device only for its intended purpose and indoors.
- Avoid hot surfaces, naked flames, extreme temperatures, direct sunlight, and water exposure.
- Do not open the housing or introduce objects into it.
- If malfunction occurs, disconnect and reconnect after a short period.
FAQ :
-
Q: What should I do if my mouse stops working suddenly?
A: If your mouse stops working unexpectedly, try disconnecting it from your computer and reconnecting it after a short period to reset it. -
Q: Can I use this mouse with a Mac computer?
A: Yes, this mouse is compatible with Mac OS X 9.x or later.
Ergonomic Mouse Instruction manual Model : 2607135
- Dongle FCC ID : 2BEQQ-2607135D,
- Mouse FCC ID: 2BEQQ-2607135M
Please read all the information carefully before you use the product and keep the manual for future reference.
Features
- 2.4 GHz wireless technology
- DPI: 800-1200-1600
- Compatible with Windows XP SP3/Vista7/8/10, Mac OS X 9.x or later
- Dongle (Receiver) Input : DC 5V
- Mouse Input : DC 3V
Inserting the Battery
- Remove the battery compartment cover of mouse and insert 2 x 1.5 V AAA battery. Please note the polarity diagram printed inside the battery compartment.
- Replace the battery compartment cover again, making sure it is close firmly.
Safety Instructions
Please read the instruction manual before using this device and follow all the safety instruction to avoid damage caused by improper use.
- Keep the instruction manual for future reference. Should this device be given to a third party, then this instruction manual must also be handed over.
- Use this device solely for its intended purpose.
- Only use this appliance indoors.
- Keep the appliance away from all hot surfaces and naked flames.
- Always put the appliance on a level, stable, clean, dry surface. Protect the appliance from extreme heat and cold, dust, direct sunlight, humidity and drops or jets of water.
- Do not immerse the appliance in water or in other liquids.
- Do not open the housing under any circumstances.
- Do not introduce any objects into the interior of the housing.
- Should the device malfunction due to electrostatic discharge or a short power surge, disconnect it from your computer and then reconnect it again.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
- lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.