radioshack BH138 Bluetooth Headset User Manual

: June 1, 2024
: RadioShack

radioshack BH138 Bluetooth Headset

USER MANUAL

Model: BH138

BUTTON OPERATING INSTRUCTIONS

M: Long press M button noise cancel sate ON/OFF

” – ” : short press for previous song; long press for volume down

: Long press 3 seconds to power ON; short press for play/pause; when a calls in, short press to answer, during call short press to hang up, double press to redial the last number.

“+” : Short press for next song; long press for volume up

LED INDICATOR

The red/blue light will flash fast under the pairing sate, when the headphones matches the phone successfully, the blue light will flash slow. In noise cancel sate, the green light is on steadily.

In charging mode, the red light is on steadily when charging, when it’s fully charged, the red light is off.

OPERATION DESCRIPTION

Long press the three-seconds to power on, the red/blue light flashes fast go to wireless pairing state.

Please pairing your smartphone by opening Bluetooth preferences and select “RS BUZZER,” when your smartphone is connected to the Bluetooth (No password is needed). When the Bluetooth connection is successful, the blue light flashes slowly.

Open your mobile phone’s music player, this product can control the next and previous song wirelessly, play and pause, answer the phone and redial, etc. To immerse in the music experience please long press M button to ON/OFF the Noise Cancel function.

LINE EXTERNAL AUDIO INPUT:

In power on mode, plug audio 3.5mm audio cable, it will turn to AUX LINE IN mode.

SPECIFICATIONS

Battery: 400mAh
Charging time: 1.5-2 hours
Wireless distance: l0mts
Active noise reduction: 15-20dB
Frequency response: 20Hz-20KHz
Chipset: JL +ADI
Stand-by time: 300 hours
Bluetooth: VS.0+EDR
Impedance: 320
Sensitivity: 110+/-3dB
Rated power: 5Wx2
Playtime: 7-9 hours

Product Usage Instructions:

1. Getting Started:

Before using the BH138, ensure it is fully charged using the provided charger.

2. Powering On/Off:

To power on the BH138, press and hold the power button for 3 seconds. To power off, repeat the same step.

3. Pairing with Devices:

Activate Bluetooth on your device and search for BH138. Select it to pair.

4. Adjusting Settings:

Use the buttons on the BH138 to adjust volume, skip tracks, or answer calls.

5. Charging:

Connect the provided charger to the BH138’s charging port to recharge when the battery is low.

Specifications:

Model: BH138
Color: Black
Material: Plastic
Dimensions: 10 x 5 x 3 inches
Weight: 1 lb

Warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However. there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.