RADIOSHACK WORLDWIDE CORP 3304404 Wireless Headphone Instruction Manual
- June 27, 2024
- RADIOSHACK WORLDWIDE CORP
Table of Contents
RADIOSHACK WORLDWIDE CORP 3304404 Wireless Headphone
Product Information
Specifications
- Brand: RadioShack Worldwide Corp.
- Model: 3304403/3304404/3304405
- Package Includes: Headphone, Type-C charging cable, User Guide
Description
- The Wireless Headphone from RadioShack Worldwide Corp. offers a convenient and immersive audio experience for users.
- With easy-to-use controls and wireless connectivity, this headphone is designed for both music listening and hands-free calling.
Features
- On/Off Button
- Volume Control (+/-)
- Type-C Charging Port
- Play/Pause Functionality
- Next/Previous Track Navigation
- Call Answering/Ending
- Last Number Redial
Product Usage Instructions
A. Charging
- Connect the Type-C charging cable to the headphones and a USB power source.
- The LED indicator will light up red during charging and turn off when fully charged.
B. Pairing
- Ensure the headphones are turned on; enter pairing mode by pressing and holding the On/Off button until the LED rapidly flashes blue and red.
- Activate Bluetooth on your device and search for available devices.
- Select “ROC06” from the list of discovered devices to pair with the headphones.
- Upon successful pairing, the LED will flash blue slowly.
Note: If the headphones are not connected to a device within 5 minutes during pairing, they will automatically turn off to save power.
Frequently Asked Questions
Q: What should I do if my headphones are not pairing with my device?
A: Make sure the headphones are in pairing mode, and your device’s Bluetooth function is enabled. Try resetting the headphones by turning them off and on again before attempting to pair them.
Q: How can I adjust the volume on the headphones?
A: Use the Volume +/- buttons on the headphones to adjust the volume levels accordingly.
Package
- Headphone
- Type-C charging cable
- User Guide
Specification
- Input charging voltage: 5V, 500mA
- Charging port: Type-C
- Charge time: approx. 3hours
- Playing time: up to 18 hours,
- Battery capacity: 3.7V, 400 mAH
- Bluetooth version: V5.4
- Frequency response: 20Hz-20kHz (Speaker)
- Sensitivity: 95±5dB(Speaker)
- Bluetooth connection range: approx. 10m
- Specifications are subject to change and improvement without notice.
- The actual product may vary from the images found in this document.
- Note: Music playback is paused during call functions and resumes when the calls end.
How to use
Charge
- Connect the Type-C charging cable to the headphone and a USB source;
- LED lights red when charging and turn off when fully charged.
Pairing
- With the headphones turned on, enter pairing mode, LED rapidly flashes blue and red.
- On your device, turn on the Bluetooth function, and set it to search for Bluetooth devices.
- Select (ROC06) from the list of found devices.
- When paired, the LED flashes blue slowly.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Note:
During pairing, if the headphones are not connected to a device within 5 minutes, they automatically turn off. This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>