radioshack BH100 Bluetooth Headphone User Manual
- June 16, 2024
- RadioShack
Table of Contents
THUNDER 2
BLU ETOOTH HEADPHONES
USER MANUAL
models: BH100
BUTTON OPERATING INSTRUCTIONS
:Long press 3 seconds to power on/off
During the music playing, click once to play/ pause the music
When a call comes in, click once to answer, quick double click to reject
When calling, double click to redial the last number
: Short press for previous song, long press for volume down
: Short press for next song, long press for volume up
LED INDICATOR
The red/blue light will flash fast under pairing state, when the headphone
matches the phone successfully, only the blue light is shown.
In charging mode, the red light is on steadily when charging, and when it’s
fully charged, the red light will be off
OPERATION DESCRIPTION
Long press C) three seconds to power on, the red/blue light flashes fast to go
to wireless pairing state.
Please pairing your cell phone by operating Bluetooth preferences and select
“RS THUNDER 2” when your cell phone is connected to the Bluetooth, no password
is needed. When the Bluetooth connection is successfully, only the blue light
is shown.
Open your cell phone music player, this product can control the next and
previous songs wirelessly, play and pause, answer calls, redial, etc.
MP3 MODE
- When the headphone is off, insert a MicroSD card, and then turn on the headphone, the headphone will play the music automatically. In Bluetooth mode, insert a MicroSD card, and then the headphone will play the music automatically.
- Press back forward and skip forward button to play the songs.
- Long press(+) or(-) button to obtain the level you want.
- Bluetooth mode and SD card MP3 mode could be switches by double clicking the M button.
LINE EXTERNAL AUDIO INPUT
In power on mode, plug audio 3.5mm audio cable, and it will turn to AUX LINE
IN mode
SPECIFICATIONS
- Impedance: 32O
- Working voltage: DC 5V
- Battery: 300mAh
- Frequency response: 20Hz-20KHz
- Charging time: 1.5-2 hours
- Stand-by time: 48 hours
- Play time- 6-8 hours
- Bluetooth 5.3
- TF audio decoding format: MP3
- Sensitivity: 103+/- 2dB
- Working range: 10-15mts
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However.
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>