BYRISON SL-EB013C Bidet for Toilet User Manual
- June 14, 2024
- BYRISON
Table of Contents
BYRISON SL-EB013C Bidet for Toilet User Manual
Enjoy freshness and comfort, and say goodbye to intimate irritation and discomfort
FEATURES
- Washes both men and ladies (anal and vulvar)
- 2 nozzles that retract automatically after use
- Easy to install in 10-15 minutes on most toilets
- Requires no electricity or plumbing
- Easy to use control handle
- Stainless Steel Connection Kit
- Efficient Pre & After Sales Service to support you
- 18-month warranty & 24h customer support
Accessory Contents
-
Brass T-adapter x1
-
Braided Metal Tube x1
-
Teflon Tape x1
TECHNICAL DETAILS
- Materials: ABS plastic, TPU plastic, rubber, copper
- 1x80cm Thick Hose ( G1/2″x 9/16″)
- 1x G1/2″ three-way T-adapter to fit Bidet to your WC
- Seals and Teflon tape to prevent leaks
- Raising wedges for your seat if required
HOW DO KNOW IF IT’S COMPATIBLE WITH MY TOILET?
- As you can sce from the Pic 02. Pic 03:
- The distance between the 2 screws of your toilet (blue arrow) should be between 96 mm and 209 mm.
- The distance between the 2 round holes and the edge of the toilet bowl (brown arrows) should be between 31 mm and 96.3 mm.
-
At the same time, the water tap where you will connect the accessory to obtain the water supply must be no more than 80cm away, which corresponds to the length of the hose we include. If you can’t reach the water inlet with the 80cm hose, you can buy a G1/2″ male-female hose from any hardware store and attach it to our hose.
-
In addition, floating toilets that leave no space for inserting the bidet and those with a hidden stopcock are incompatible. Toilets with a curved part where the bidet will be placed are also incompatible, as the bidet must be placed on a flat surface. (Refer to Pic 04)
ACCESSORIES
-
Bidet Attachment
-
Thread Seal Tape (1)
-
Non-slip mat (2)
-
Adapter (1)
-
Circular mounting brackets (2)
If the hose is too short,contact us and we will give solution
Tips:
The included parts meet plumbing standards of the country of sale. However, some homes may have alternative sized fittings or the hose is too short to connect. If the included parts do not work for your setup please contact us right away for assistance with alternative parts.
3 WAYS TO CONNECT THE T-ADAPTER
(Please choose a suitable solutions according the pipe of your toilet)
Water valve
Solution 1.
Connect the provided T-adapter to the water valve on the wall (As the picture
show).
Toilet tank water inlet
Solution 2.
The provided T-adapter should be installed at the fill valve under the toilet
tank.
Washbowl
Solution 3.
Connect the provided T-adapter to the water valve under the washbow.
INSTALLATION STEPS
Step 1 – Turned off the water supply and empty the toilet tank.
Step 2 – Remove the toilet seat.
At tension: The original bolts and screws should be removed together and
set them aside.
Important: Make sure that all bolts and screws are removed from the
toilet bowl.
The toilet bowl should not have any bolts or screws before mounting the bidet!
Step 3- Insert the rubber non-slip mats to the bottom of the bidet.
Step 4- Mount Your Bidet on the Toilet ‘You may need to rotate the
adjustment plates accordingly to line up properly with the holes.Then reattach
the toilet seat on top of the bidet attachment and secure to use the original
bolts and screws.
Step 5 – Disconnect the Water Ssupply Hose
Step 6- Check the T-adapter
Make sure that there is a black rubber washer inserted at the top of the
t-adapter. If it is not already there, insert the black rubber washer so it is
securely in place, as shown in the picture.
Step 7 – Install the T-adapter to the Toilet Tank
Connect the top of the t-adapter to the toilet tank and the bottm of the
t-adapter to the water supply hose.
PRO TIP: Do not overtighten connections. Simply turn the connection by hand then use the wrench to tighten a quarter turn more.
Step 8 – Connect the hose provided to the bidet and T-adapter
If the hose is too short,please contact us.
Congratulations! You are ready to use the Bidet for the first time. Gently turn the water pessre control knob to reach your desired spray pessure.
Assembled Unit
Scan this QR code to access detailed installation instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>